Download Implementing Cisco Wireless Network Fundamentals.train4sure.200-355.2019-04-30.1e.329q.vcex

Download Exam

File Info

Exam Implementing Cisco Wireless Network Fundamentals
Number 200-355
File Name Implementing Cisco Wireless Network Fundamentals.train4sure.200-355.2019-04-30.1e.329q.vcex
Size 14.66 Mb
Posted April 30, 2019
Downloads 291

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Coupon: EXAM_HUB

Discount: 20%


Demo Questions

Question 1
A wireless engineer has been asked to plan a deployment covering the aisles of a warehouse with optimal coverage while bleeding RF across aisles. Which antenna type provides the necessary coverage?

  • A: patch
  • B: omnidirectional
  • C: Yagi
  • D: parabolic dish

Question 2
Which two principles must be considered when deploying a wireless network through a wooded area? (Choose two.)

  • A: absorption
  • B: reflection
  • C: diffraction
  • D: scattering
  • E: refraction

Question 3
What is an interferer that an engineer may see in Cisco CleanAir?

  • A: microwave ovens
  • B: rogue APs
  • C: malicious clients
  • D: co-channel interference

Question 4
A network engineer notices that two mesh APs are having problems communicating. After reviewing the current radio configurations, it is noted that one AP is transmitting at 3 mW while the other is transmitting at 60 mW. How many decibels would the 3-mW AP need its power increased to match the 60-mW AP?

  • A: 8
  • B: 12
  • C: 13
  • D: 20
  • E: 57

Question 5
An engineer needs an AP with at least two spatial streams, four receivers, and three transmitters. Which device meets these requirements?

  • A: 2x4:3
  • B: 2x3:4
  • C: 4x3:2
  • D: 3x4:2

Question 6
What is the effect of increasing antenna gain on a radio?

  • A: focusing energy in a defined direction
  • B: adding energy creating a larger cell
  • C: aligning phase shifting
  • D: improving frequency specific diversity

Question 7
The new tablets for the sales department require an SNR of 18 or more to operate. Given a noise floor of -88 dBm, what is the minimum RSSI that is needed?

  • A: -60 dBm
  • B: -70 dBm
  • C: -72 dBm
  • D: -80 dBm
  • E: -96 dBm
  • F: -106 dBm

Question 8
When reading a radiation pattern for an antenna, at which two drops in signal and power is the beam width measured? (Choose two.)

  • A: 3 dB
  • B: 6 dB
  • C: 9 dB
  • D: 10 dB
  • E: 1/2 power
  • F: 1/4 power
  • G: 1/8 power
  • H: 1/10 power

Question 9
When calculating the link budget for a wireless point-to-point bridge, the engineer notices that one antenna has its gain marked as 2.85 dBd. With a 20-mW access point and 3-dBi loss for the cable, what is the approximate EIRP?

  • A: 15 dBm
  • B: 18 dBm
  • C: 22 dBm
  • D: 25 dBm

Question 10
Due to the terrain, a deployment requires a point-to-point wireless bridge to allow for network connectivity to a remote building. What 5GHz band would permitted to use the highest power in the U.S.?

  • A: U-NII-3
  • B: U-NII-2 Extended
  • C: U-NII-2
  • D: U-NII-1



You can buy ProfExam with a 20% discount..

Get Now!


Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen


Use VCE Exam Simulator to open VCE files