Download Troubleshooting Cisco IP Telephony & Video v1-0.CertDumps.300-080.2019-08-21.1e.192q.vcex

Download Exam

File Info

Exam Troubleshooting Cisco IP Telephony & Video v1.0
Number 300-080
File Name Troubleshooting Cisco IP Telephony & Video v1-0.CertDumps.300-080.2019-08-21.1e.192q.vcex
Size 8.68 Mb
Posted August 21, 2019
Downloads 34

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAM_HUB

Discount: 20%

 
 



Demo Questions

Question 1
When a database replication issue is suspected, which three tools can be used to check the database replication status? (Choose three.)

  • A: Cisco Unified Communications Manager RTMT tool
  • B: Cisco Unified Communications Manager Serviceability interface
  • C: Cisco Unified Reporting
  • D: Cisco Unified Communications Manager CLI interface
  • E: Cisco IP Phone Device Stats from the Settings button
  • F: Cisco Unified OS Administration interface



Question 2
Which two troubleshooting tools would initially be the best to use when troubleshooting the PSTN gateway side of a call routing issue while using Cisco Unified Communications Manager? (Choose two.)

  • A: RTMT trace output
  • B: Cisco IOS debug commands
  • C: Dialed Number Analyzer output
  • D: Cisco Unified Communications Manager alerts
  • E: Cisco IOS show commands



Question 3
Which command is used on an IOS Router that is acting as a SAF Forwarder to confirm its registration status with a SAF Client?

  • A: show ip asf-forwarder status details
  • B: show ospf neighbor details
  • C: show ip interface details
  • D: show cdp neighbor details
  • E: show eigrp service-family ipv4 clients details
  • F: show service-family asf-forwarder details



Question 4
In a SAF deployment, the registration status looks correct and the learned patterns appear reachable, but calls are not routed. What is causing this issue?

  • A: network connection failure between the SAF Forwarder and Cisco Unified Communications Manager
  • B: network connection failure between the primary and backup SAF Forwarders
  • C: TCP connection failure with the primary SAF Forwarder
  • D: TCP connection failure with the backup SAF Forwarder



Question 5
Refer to the exhibits. Assume that all learned SAF routes are placed in the SAF_Pt partition.
An IP phone CSS contains the following partitions in this order: Internal_Pt, SAF_Pt.
When the IP phone places a call to 3001, what will occur?



  • A: The call will succeed and will be placed via the SAF network. SAF-learned routes always take precedence.
  • B: The call will fail because it will be blocked by the route pattern.
  • C: The call will be placed in a round-robin fashion between the SAF network and SIP_Trunk.
  • D: The call will be placed in a round-robin fashion between the SAF network and SIP_Trunk.Every other call will fail.



Question 6
Refer to the exhibits. Assume that all learned SAF routes are placed in the SAF_Pt partition. The 3XXX directory number pattern is being advertised by a remote cluster and is also being blocked by the local cluster that is shown in the exhibit. An IP phone is attached to the local cluster and is configured with a CSS that contains the following partitions: SAF_Pt and Internal_Pt in this order.
When the IP phone places a call to 3001, what will occur?



  • A: The call will succeed and will be placed via the SIP_Trunk.
  • B: The call will fail because it will be blocked by the CCD Blocked Learned Route configuration.
  • C: The call will be placed in a round-robin fashion between the SAF network and SIP_Trunk.
  • D: The call will placed in a round-robin fashion between the SAF network and SIP_Trunk.Every other call will fail.



Question 7
When dialing any external SIP URI for a business-to-business call, an endpoint that is registered to the Cisco VCS Control fails to locate the remote endpoint. The same endpoint can successfully call another endpoint that is registered to the Cisco VCS Expressway.
How do you resolve this issue?

  • A: Add traversal call licensing on the Cisco VCS Expressway.
  • B: Add traversal call licensing on the Cisco VCS Control.
  • C: Add a multisite option to the endpoint.
  • D: Configure a proper DNS zone on the Cisco VCS Expressway.
  • E: Configure a traversal zone between the Cisco VCS Control and the Cisco VCS Expressway.
  • F: Configure a SIP route pattern in Cisco Unified Communications Manager.



Question 8
Which CLI command monitors ILS replication progress?

  • A: utils ils findxnode
  • B: utils ils show peer info
  • C: utils ils showpeerinfo
  • D: utils ils lookup



Question 9
When parsing trace output after the call routing decision and path selection have been made, which two records can be found in the CCM|RouteList? (Choose two.)

  • A: PretransfromDigitString
  • B: CallingPartyNumber
  • C: PretransformCallingPartyNumber
  • D: RouteListName
  • E: findLocalDevice
  • F: RouteListCdrc :



Question 10
Refer to the exhibit. The exhibit shows the output of debug isdn q931. An inbound PSTN call was received by a SIP gateway that is reachable via a SIP trunk that is configured in Cisco Unified Communications Manager. The call failed to ring extension 3001. If the phone at extension 3001 is registered and reachable through the gateway inbound CSS, which three actions can resolve this issue? (Choose three.)



  • A: Change the significant digits for inbound calls to 4 on the SIP trunk configuration in Cisco Unified Communications Manager.
  • B: Configure the digit strip 4 on the SIP trunk under Incoming Called Party Settings in Cisco Unified Communications Manager.
  • C: Configure a translation pattern in Cisco Unified Communications Manager that can be accessed by the trunk CSS to truncate the called number to four digits.
  • D: Configure a called-party transformation CSS on the gateway in Cisco Unified Communications Manager that includes a pattern that transforms the number from ten digits to four digits.
  • E: Configure a voice translation profile in the SIP Cisco IOS gateway with a voice translation rule that truncates the number from ten digits to four digits.
  • F: Configure the Cisco IOS command num-exp 2288223001 3001 on the gateway ISDN interface.






CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset