Download Deploying Cisco Wireless Enterprise Networks.test-inside.300-365.2019-09-23.1e.86q.vcex

Download Exam

File Info

Exam Deploying Cisco Wireless Enterprise Networks
Number 300-365
File Name Deploying Cisco Wireless Enterprise Networks.test-inside.300-365.2019-09-23.1e.86q.vcex
Size 763 Kb
Posted September 23, 2019
Downloads 7

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Purchase
Coupon: EXAM_HUB

Discount: 20%

 
 



Demo Questions

Question 1
Refer to the exhibit. 

  
  
What two items need to be supported on the VoWLAN phones in order to take full advantage of this WLAN configuration? (Choose two.)

  • A: APSD
  • B: 802.11a
  • C: 802.11e
  • D: WMM
  • E: 802.11r
  • F: SIFS



Question 2
A network engineer for a college dormitory notices that student devices are filling up the SP-DB and are not allowing the shared wireless printers to be discovered. Which feature can be used to reserve space in the SP-DB for the printers?

  • A: mDNS-AP
  • B: LSS
  • C: Priority MAC
  • D: SSO



Question 3
A customer requires that an SSID is broadcasted to specific access points that use certain interfaces. Which feature can be used to achieve this goal?

  • A: mobility groups
  • B: flex-connect groups
  • C: interface groups
  • D: AP groups



Question 4
Which of the following is not a Cisco RF fingerprinting key advantage over Location Tracking?

  • A: Uses existing LWAPP-enabled Cisco Unified Networking components.
  • B: Proprietary client hardware or software is required.
  • C: Better accuracy and precision.
  • D: Reduced calibration effort.



Question 5
A customer has implemented several WLANs in an auditorium utilizing a newly dedicated WLC and is experiencing excessive channel utilization regardless of occupancy. Which action reduces channel utilization without removing SSIDs?

  • A: Disable MCS data rates 0 through 11.
  • B: Disable MCS data rates used by 40 MHz channels.
  • C: Disable data rates that use CCK.
  • D: Disable VHT data rates.



Question 6
A corporation has a Cisco Unified Wireless Network that has been deployed for voice coverage. The wireless data rates have been tuned to mandatory rates of 18 Mbps and 36 Mbps. Some wireless clients have been experiencing drops streaming multicast video while moving throughout the building. What is the cause of the drop in video?

  • A: Clients are roaming at lower data rates and are not maintaining 36Mbps connectivity.
  • B: Clients are not roaming due to coverage. This is causing the multicast data to drop due to the client re-associating often.
  • C: Clients are connected at 18Mbps; however, other clients are connecting at 12Mbps and are causing the multicast video to degrade.
  • D: Clients are maintaining a 12Mbps rate and cannot receive the stream at 18Mbps.



Question 7
An engineer used an interface group under the SSID configuration, but noticed that a test client is getting an IP assigned in a different VLAN from the DHCP server. Which two options override the interface group configuration on the SSID? (Choose two.)

  • A: static VLAN on client
  • B: ACL
  • C: AP group
  • D: static IP on client
  • E: MAC filtering
  • F: RF group
  • G: AAA override



Question 8
The customer has deployed C7960 phones with clients connected to them. What switch feature could be enabled to distinguish IP voice traffic from client data traffic?

  • A: Voice VLAN
  • B: QoS routing
  • C: WME
  • D: Weighted Queuing
  • E: QBSS



Question 9
Which show command will show whether a WLAN is locally or centrally switched on a Cisco Wireless Lan Controller?

  • A: show ap config general Cisco_AP
  • B: show wlan wlan_id
  • C: show flexconnect summary
  • D: show flexconnect group detail



Question 10
A network engineer is experiencing issues enabling LAG on the WLC. Which four characteristics should be validated to ensure LAG configuration? (Choose four.)

  • A: Аll ports participate in the LAG by default when LAG is enabled on the controller. y
  • B: Dynamic interfaces and management are moved to port 1
  • C: Primary and secondary ports are needed for each interface.
  • D: Multiple untagged interfaces to the same port are not allowed.
  • E: EtherChannel must be configured for mode “on” on the switch.
  • F: Only one functional physical port is needed to continue to pass traffic.
  • G: Multiple LAGs are permitted on the controller.
  • H: The WLC does not need to be rebooted to enable the LAG configuration.






CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset