Download Troubleshooting Cisco Wireless Enterprise Network.actualtests.300-370.2019-02-04.1e.61q.vcex

Download Exam

File Info

Exam Troubleshooting Cisco Wireless Enterprise Network
Number 300-370
File Name Troubleshooting Cisco Wireless Enterprise Network.actualtests.300-370.2019-02-04.1e.61q.vcex
Size 4.31 Mb
Posted February 04, 2019
Downloads 31

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAM_HUB

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator
 
 


Demo Questions

Question 1
  

Refer to the exhibit. 
A new wireless deployment with high AP density is experiencing high latency and connectivity issues on the 2.4 GHz band, despite an initial site survey done by a certified partner. Which option is the most impactful change a wireless consultant recommends?

  • A: Increase the fragmentation threshold to allow larger packets over the air.
  • B: Reduce the beacon period because it reduces the RF interference.
  • C: Disable lower data rates such as 1 Mbps and 2 Mbps.
  • D: Disable the short preamble.
  • E: Disable 802.11g support to reduce interference.
Correct Answer: C



Question 2
A wireless user is experiencing connectivity issues with their Mac OS laptop. If the Mac is exhibiting the behavior of a “sticky client,” how can the tech verify which AP the user is currently connected to?

  • A: Hold shift while clicking the wireless icon.
  • B: Hold option while clicking the wireless icon.
  • C: Hold control while clicking the wireless icon.
  • D: Hold command while clicking the wireless icon.
Correct Answer: B



Question 3
You have successfully configured HA and SSO using two Cisco 5508 Wireless LAN Controllers. You are able to access the Active Primary WLC but are unable to access the Secondary Standby WLC. Which two methods will allow you to access the standby unit? (Choose two.)

  • A: Via SSH to the Redundancy Management Interface.
  • B: Via Service Port Interface.
  • C: Via SSH to the Management Interface.
  • D: Via console connection.
Correct Answer: CD



Question 4
An engineer has configured 802.1x for the network and all but one of the APs are passing authentication. Which configuration is causing the failure?

  • A: The AP has override global credentials checked.
  • B: The switch AAA credentials do not match what is configured on ISE.
  • C: The controller 802.1x supplicant credentials do not match what is configured on ISE.
  • D: EAP-FAST is configured on ISE for this AP.
Correct Answer: A



Question 5
An engineer is troubleshooting AP join issues on a wireless infrastructure. While gathering debugs, the engineer notices that one of the commands may generate an excessive amount of data on the console. Which command causes this to occur?

  • A: debug capwap detail enable
  • B: debug capwap errors enable
  • C: debug capwap info enable
  • D: debug capwap events enable
  • E: debug capwap packet enable
  • F: debug capwap payload enable
Correct Answer: B



Question 6
Which ports require unrestricted port access for CleanAir RF spectrum analysis between the AP and Cisco Spectrum Expert?

  • A: UDP 5246 and 5247
  • B: UDP 37540 and 37550
  • C: TCP 16113 and 16114
  • D: TCP 37540 and 37550
  • E: TCP 5246 and 5247
  • F: UDP 16113 and 16114
Correct Answer: D



Question 7
A network engineer is troubleshooting why EAP authentication with a client is failing. Which two commands should be used to resolve the issue? (Choose two.)

  • A: debug dot1x notifications enable
  • B: debug dot1x events enable
  • C: debug arp
  • D: debug aaa detail enable
  • E: debug aaa events detail enable
Correct Answer: BE



Question 8
Refer to the exhibit. 

  
  
An engineer is troubleshooting non-802.11 interference and observes this output. Which type of interference signatures can the engineer identify?

  • A: microwave
  • B: DECT phone
  • C: Bluetooth
  • D: jammer
Correct Answer: A



Question 9
Refer to the exhibit. 

  
  
An engineer is troubleshooting access point placement issues and suspects that poor placement is causing connectivity issues. When running the show client detail <mac> command, the engineer notices this output. Which option indicates poor access point placement?

  • A: excessive number of bytes sent compared to bytes received
  • B: high signal-to-noise ratio
  • C: excessive number of data retries
  • D: low ratio signal strength indicator
  • E: duplicate received packets
  • F: poor statistics for the last 90 seconds
Correct Answer: CD



Question 10
An AP will be deployed to an area where DHCP Option 43 is unavailable and the WLAN engineer is unable to have DNS modifications made to support this AP. Which two actions can enable the AP to join the WLC? (Choose two.)

  • A: issue the clear capwap private-config command in the AP console.
  • B: Pre-stage or prime the AP on the same Layer 2 VLAN as the WLC.
  • C: Issue the capwap ap ip default-gateway WLC IP address command in the AP console.
  • D: Issue the capwap ap ip address WLC IP address command in the AP console.
  • E: Issue the capwap ap controller ip address WLC IP address command in the AP console.
Correct Answer: AD






CONNECT US


ProfExam
PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!


HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen



HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset