Download CCIE Collaboration Written Exam v1-1.realtests.400-051.2019-09-20.1e.346q.vcex

File Info

Exam	CCIE Collaboration Written Exam v1.1
Number	400-051
File Name	CCIE Collaboration Written Exam v1-1.realtests.400-051.2019-09-20.1e.346q.vcex
Size	22.35 Mb
Posted	September 20, 2019
Downloads	15

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAM_HUB

Discount: 20%

Demo Questions

Question 1

Which statement about the Cisco UC on UCS TRC and the third-party server specs-based virtualization support model is true?

A: Both the UC on UCS TRC and the third-party servers spec-based support models have rule-based approaches.
B: The UC on UCS TRC support model has a rule-based approach and the third-party servers spec-based support model has a configuration-based approach.
C: The UC on UCS TRC support model requires a high level of virtualization experience while the third-party server spec-based support model requires a low to medium level virtualization experience.
D: VMware vCenter is mandatory for the UC on UCS TRC support model but it is optional for the third-party server spec-based support model.
E: VMware vCenter is optional for the UC on UCS TRC support model but it is mandatory for the third-party server spec-based support model.

Correct Answer: E

VMware vCenter is
optional when deploying on UC on UCS Tested Reference Configuration hardware
mandatory when deploying on UC on UCS Specs-based and Third-party Server Specs-based hardware.
vCenter Statistics Level 4 logging is mandatory so that Cisco TAC is able to provide effective support.
Click here for how to configure VMware vCenter to capture these logs. If not configured by default, Cisco TAC may request enabling these settings in order to provide effective support.
Also note that enablement of specific VMware vSphere management features may require vCenter and/or a higher feature Edition of vSphere ESXi.
Cisco Collaboration does not require its own dedicated vCenter.
Note that when VMware vCenter is not required and is not used, then VMware vSphere ESXi's default management interface is its free/included VMware vSphere Client (formerly branded VI Client).
Reference: http://docwiki.cisco.com/wiki/Unified_Communications_VMware_Requirements

Question 2

Which definition is included in a Cisco UC on UCS TRC?

A: required RAID configuration, when the TRC uses direct-attached storage
B: configuration of virtual-to-physical network interface mapping
C: step-by-step procedures for hardware BIOS, firmware, drivers, and RAID setup
D: configuration settings and patch recommendations for VMware software
E: server model and local components (CPU, RAM, adapters, local storage) by name only; part numbers are not included because they change over time

Correct Answer: A

Definition of server model and local components (CPU, RAM, adapters, local storage) at the orderable part number level.
Required RAID configuration (e.g. RAID5, RAID10, etc.) - including battery backup cache or SuperCap - when the TRC uses DAS storage
Guidance on hardware installation and basic setup.
Configuration of Virtual-to-physical network interface mapping is design-dependent and not included in TRC definition.
Configuration of adapters (such as Cisco VIC, 3rd-party CNA / NIC / HBA) is design-dependent and not included in TRC definition.
Design, installation and configuration of external hardware is not included in TRC definition, such as:
Network routing and switching (e.g. routers, gateways, MCUs, ethernet/FC/FCoE switches, Cisco Catalyst/Nexus/MDS, etc.)
QoS configuration of route/switch network devices
Cisco UCS B-Series chassis and switching components (e.g. Cisco UCS 6100/6200, Cisco UCS 2100/2200, Cisco UCS 5100)
Storage arrays (such as those from EMC, NetApp or other vendors)
Configuration settings, patch recommendations or step by step procedures for VMware software are not included in TRC definition.
Infrastructure solutions such as Vblock from Virtual Computing Environment may also be leveraged for configuration details not included in the TRC definition.

Question 3

Which capability is supported by Cisco Discovery Protocol but not by LLDP-MED?

A: LAN speed and duplex discovery
B: Network policy discovery
C: Location identification discovery
D: Power discovery
E: Trust extension

Correct Answer: E

Cisco Discovery Protocol provides an additional capability not found in LLDP-MED that allows the switch to extend trust to the phone. In this case, the phone is now trusted to mark the packets received on the PC port accordingly. This feature can be used to off-load the switch because now it does not need to police the information being received from the phone.

Question 4

Which two mechanisms does Cisco EnergyWise use for neighbor discovery? (Choose two.)

A: multicast
B: LLDP-MED
C: UDP broadcast
D: Cisco Discovery Protocol
E: TCP

Correct Answer: CD

Cisco EnergyWise Neighbor Discovery Process
The Cisco EnergyWise neighbor discovery process is the mechanism by which domain members discover each other and populate their Cisco EnergyWise neighbor tables. Cisco EnergyWise queries can subsequently be distributed to all domain members using the neighbor relationships to monitor and control the power usage of devices within a domain. Cisco EnergyWise domain members automatically discover their neighbors through one of two mechanisms:
UDP broadcast packets are automatically sent out switch ports which support Cisco EnergyWise, regardless of whether the interfaces are configured with the no energywise interface-level command. CDP packets are sent when CDP is configured for the switch ports.
References: http://www.cisco.com/en/US/docs/solutions/Enterprise/Borderless_Networks/Energy_Management/energywisedg.html?referring_site=smartnavRD#wp555927

Question 5

Which statement describes a disadvantage of using the Cisco TFTP service to serve IP phone load files?

A: The Cisco TFTP services can run on only one Cisco Unified Communications Manager server in a cluster.
B: Because TFTP operates on top of UDP, there is a high risk of corrupted load file delivery at the completion of the TFTP process due to undetected data loss in the network.
C: If a response is not received in the timeout period, the TFTP server will not resend the data packet.
D: Packet loss can significantly increase the TFTP session completion time.
E: Because TFTP operates with an adaptive timeout period, the time to complete the file transfer is unpredictable.

Correct Answer: D

Voice traffic cannot recapture lost packets. Rather than retransmitting a lost network connection, the phone resets and attempts to reconnect its network connection.
References: http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/6921_6941_6961/7_1_2/english/admin/guide/6921trb.html#wp1031181

Question 6

Which two statements about the Peer Firmware Sharing option for IP phone firmware distribution are true? (Choose two.)

A: This option uses a parent-child hierarchy in which a firmware image is downloaded by a parent phone to up to three directly associated child phones.
B: This option must be enabled on Cisco Unified Communications Manager service parameters for Cisco TFTP.
C: This option mandates that the parent phone and child phones be identical, selected phone models.
D: This option allows firmware transfers between phones in different subnets, as long as the round-trip delay is less than 5 milliseconds.
E: This option uses a parent-child hierarchy that must be manually defined by the Cisco Unified Communications Manager administrator.
F: This option allows falling back to the TFTP server in the Cisco Unified Communications Manager cluster.

Correct Answer: CF

Peer Firmware Sharing works by setting up a parent-child hierarchy of the phones in which a firmware image is downloaded by the parent phone to a child phone. The advantage of using Peer Firmware Sharing is that instead of all phones individually retrieving a software image, they pass the image along from one phone to another phone on the same subnet.
Advantage of PFS:
Hierarchy is automatic
One download per phone model on a subnet
Uses TCP
Fails back to TFTP
Speeds up LAN upgrades
Reduces TFTP CPU load during upgrade

Question 7

Which capability is support by LLDP-MED but not by Cisco Discovery Protocol?

A: LAN speed discovery
B: network policy discovery
C: location identification discovery
D: power discovery
E: trust extension

Correct Answer: A

LLDP-MED supports both LAN speed and duplex discovery. Cisco Discovery Protocol supports duplex discovery only, but this limited support is not seen as a problem because if there is a speed mismatch, LLDP-MED and Cisco Discovery Protocol cannot be exchanged and thus cannot be used to detect the mismatch.

Question 8

In a Cisco EnergyWise domain, which two terms describe a Cisco IP phone? (Choose two.)

A: endpoint
B: domain member
C: child domain member
D: EnergyWise agent
E: Cisco power distribution unit

Correct Answer: AC

References: http://www.cisco.com/en/US/docs/switches/lan/energywise/phase2_5/ios/configuration/guide/one_ent.html

Question 9

Which statement about Cisco EnergyWise domain member neighbor formation is true?

A: Cisco EnergyWise supports static neighbors, but the neighbor relationship is only possible if a noncontiguous domain member and a contiguous domain member have a static neighbor entry pointing to each other.
B: Cisco EnergyWise static neighbors can be formed even if domain members are not physically contiguous.
C: Static neighbors can be manually defined on Cisco EnergyWise domain members, but TCP protocols must be used.
D: Static neighbors can be manually defined on Cisco EnergyWise domain members, but they have a lower priority compared to the autodiscovered members.
E: Static neighbors can be manually defined on Cisco EnergyWise domain members and the TCP or UDP protocol can be used.

Correct Answer: B

References: http://www.cisco.com/en/US/docs/solutions/Enterprise/Borderless_Networks/Energy_Management/energywisedg.html?referring_site=smartnavRD#wp554384

Question 10

Refer to the exhibit.

Assuming that the administrator has never performed any manual custom uploads, which two file types can be found when you choose Software Upgrades, followed by TFTP File Management on the Cisco Unified Operating System Administration web page for Cisco Unified Communications Manager? (Choose two.)

A: IP phone configuration files
B: announcement audio files
C: ringer files
D: IP phone license files
E: sample music-on-hold audio files
F: softkey template files

Correct Answer: BC

The two file types that we get are Announcement Audio Files and Ringer Files.

CONNECT US

PROFEXAM WITH A 20% DISCOUNT

You can buy ProfExam with a 20% discount..

Get Now!

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset