Download Implementing Cisco Collaboration Core Technologies (CLCOR).DumpsBase.350-801.2022-01-26.1e.193q.vcex

Download Exam

File Info

Exam Implementing Cisco Collaboration Core Technologies (CLCOR)
Number 350-801
File Name Implementing Cisco Collaboration Core Technologies (CLCOR).DumpsBase.350-801.2022-01-26.1e.193q.vcex
Size 6.65 Mb
Posted January 26, 2022
Downloads 14

How to open VCEX & EXAM Files?

Files with VCEX & EXAM extensions can be opened by ProfExam Simulator.

Coupon: EXAM_HUB

Discount: 20%


Demo Questions

Question 1
AN engineer is implementing toll fraud prevention for incoming calls cluster-wide on cisco UCM.What is the first step to configure this feature?

  • A: Set service parameter 'Block OffNet to OffNet Transfer' to False
  • B: Configure blocking for inbound calls based on caller ID.
  • C: Set service parameter "System Remote Access Blocked Numbers' to True
  • D: Set service parameter 'Block OffNet To OffNet Transfer' to True

Question 2
An administrator executes the debug isdn q931 command while debugging a failed call. After a test call isplaced, the logs return a disconnect cause code of 1.  
What is the cause of this problem?

  • A: The destination number rejects the call
  • B: The destination number is busy
  • C: The media resource is unavailable
  • D: The dialed number is not assigned to an endpoint

Question 3
When a 8800 series phone is registered over MRA, where does it register?

  • A: Cisco Unified Communications Manager
  • B: Expressway-C
  • C: Cisco Unified Presence Server
  • D: Expressway-E

Question 4
After an engineer implements the FAC and CMC features together, users report that calls take almostone minute to complete and that they occasionally hear the reorder tone.  
Which two actions address this issue? (Choose two.)

  • A: Advise the user to press the "#" button after dialling the FAC and CMC codes 
  • B: Change the code if the problem persists i/i-Advise the user to hang up and try again
  • C: Adjust the T302 timer from the default of 15 seconds to 5 seconds to shorten the interdigit timer
  • D: Do not wait for the tones immediately dial the FAC and CMC

Question 5
Which Cisco Unity Connection handler plays a greeting that announces the option to dial a userextension by default?

  • A: the Goodbye call handler
  • B: the Operator call handler
  • C: the Directory handler
  • D: the Interview handler

Question 6
Which Cisco Unified communications manager configuration is required for SIP MWI integration?

  • A: Select “Redirecting Diversion Header Delivery – Inbound” on the SIP trunk.
  • B: Enable “Accept presence subscription” on the SIP trunk security profile.
  • C: Select “Redirecting Diversion Header Delivery – outbound” on the SIP trunk.
  • D: Enable “Accept unsolicited notification” on the SIP Trunk security profile.

Question 7
Which action is required for a firewall configuration on a Mobile and Remote Access through CiscoExpressway deployment?

  • A: The traversal zone on Expressway-C points to Expressway-E through the peer address field on the traversal zone, which specifies the Expressway-E server address. For dual NIC deployments, set the Expressway-E address using an FQDN that resolves the IP address of the internal interface
  • B: The internal firewall must allow these inbound and outbound connections between Expressway-C and Expressway-E. SIP: HTTPS (tunneled over SSH between C and E): TCP 2222; TCP 7001; Traversal Media: UDP 2776 to 2777 (or 36000 to 36011 for large VM/appliance): XMPP: TCP 7400.
  • C: The external firewall must allow these inbound connections to Expressway: SIP: TCP 5061; HTTPS: 
    TCP 8443: XMPP: TCP 5222; Media: UDP 36002 to 59999.
  • D: Do not use a shared address for Expressway-E and Expressway-C, as the firewall cannot distinguish between them If static NAT for IP addressing on Expressway-E is used, ensure that any NAT operation on Expressway-C does not resolve the same traffic IP address Shared NAT is not supported.

Question 8
A user takes a phone from San Francisco to New York for a short reassignment. The phone was set up to use the San Francisco device pool, and device mobility is enabled on the Cisco UCM. The user makes a call that matches a route pattern in a route list that contains the Standard Local Route Group.  
To where does the call retreat?

  • A: The call egresses in New York because the device automatically is assigned a New York device pool and uses the local gateway
  • B: The call egresses in San Francisco because the user uses device mobility and is allowed to roam while still keeping the number and resources assigned in San Francisco
  • C: The call fails because the Standard Local Route Group is being used only if no configuration is set for the device pools
  • D: The call fails because device mobility is turned on. and the phone is not configured in New York The engineer must configure which sites the device should be roaming to

Question 9
On which Cisco Unified Communications Manager nodes can the TFTP service be enabled?

  • A: Any node
  • B: Any subscriber nodes
  • C: Only nodes that have Cisco Unified CM service enabled
  • D: Any two node

Question 10
Which description of the Mobile and Remote Access feature is true?

  • A: Collaboration Edge feature that enables remote individuals to perform international calls from Jabber with a VPN connection
  • B: Collaboration Edge feature that enables remote individual to access enterprise collaboration services via Jabber with the use of a VPN connection
  • C: Collaboration Edge feature that enables remote individuals to access enterprise collaboration services via Jabber without the use of a VPN connection
  • D: Collaboration Edge feature that enables remote individuals to access all enterprise collaboration services using a PC within the corporate environment



You can buy ProfExam with a 20% discount..

Get Now!


Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen


Use VCE Exam Simulator to open VCE files