Download CA Unified Infrastructure Management 8.x Professional.CAT-540.TestInside.2018-09-07.24q.vcex

Vendor: CA-Technologies
Exam Code: CAT-540
Exam Name: CA Unified Infrastructure Management 8.x Professional
Date: Sep 07, 2018
File Size: 18 KB
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAM_HUB

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
In Unified Services Manager (USM), you are attempting to discover Linux/UNIX servers on a remote site using the Discovery Wizard. However, no servers are discovered. You know that several servers exist at the remote site, as does a firewall with TCP ports 48000 to 48030 open. 
Earlier, you successfully deployed robots on Windows and Linux target servers. In addition, Quality of Service (QoS) data is visible. Why is the Discovery Wizard failing to locate the servers?
  1. SSL needs to be enabled.
  2. Windows Management Instrumentation (WMI) port 160 is closed.
  3. The discovery profile needs to be deleted and re-created.
  4. Internet Control Message Protocol (ICMP) is not enabled across the firewall.
Correct answer: C
Question 2
CA UIM fails to communicate with a device hosted on a network protected by a firewall. Which command is used to test the routing from the CA UIM server to the device and from the device to the CA UIM server?
  1. Powershell
  2. Perl
  3. tracert
  4. Telnet
Correct answer: A
Question 3
CA UIM server components automate the discovery of hosts and devices throughout your network. For discovery, which protocols are supported?
  1. Link Layer Discovery Protocol (LLDP) and IEEE 802.1AB
  2. Simple Service Discovery Protocol (SSDP), Neighbor Discovery Protocol (NDP), and Cisco Discovery Protocol (CDP)
  3. SSH, WMI, SNMP, and Internet Control Message Protocol (ICMP) ping
  4. Telnet, FTP, DNS, and Windows Management Instrumentation (WMI)
Correct answer: A
Question 4
You are a CA UIM administrator in a financial organization. Your company provides and hosts agency services in a highly secure network. In some cases, one operating system is shared to host multiple services for multiple agencies. Your manager has assigned you the task of managing and monitoring each server. However, this must be done independently for each agency. You can deploy multiple robots on each server to independently monitor the services for each agency. 
For the successful deployment of multiple robots, which steps must be included in your configuration plans? (Choose four.)
  1. Delete all lines that begin with magic_key from the controller.cfg file before you copy the file to a new robot.
  2. Ensure that the value of the controller_port setting on each robot is 48000.
  3. Clear the niscache folder contents before copying the robot configuration.
  4. Delete all lines that begin with magic_key from the robot.cfg file before you copy the file to a new robot.
  5. Create a new service for each new robot.
  6. Configure each robot on a server with a unique port range.
Correct answer: ACDE
Question 5
You completed the nimldr installation on several Linux distributions. Now you need to enable the nimbus service. Which Linux command should you run to enable the service?
  1. systemctl enable nimbus.service
  2. /etc/init.d/niminit start
  3. /opt/nimsoft/bin/niminit run
  4. /nimldr -I NMS_server_name_or_IP_address
Correct answer: A
Explanation:
You must enable the nimbus service after your nimldr installation is complete. To enable the nimbus service, execute: systemctl enable nimbus.service Reference: http://support.nimsoft.com/unsecure/archive.aspx?id=55
You must enable the nimbus service after your nimldr installation is complete. To enable the nimbus service, execute: 
systemctl enable nimbus.service 
Reference: http://support.nimsoft.com/unsecure/archive.aspx?id=55
Question 6
You are attempting to set up monitoring on servers running Red Hat SELinux 7.1. You are unable to turn off the iptables firewall. After getting a Linux robot up and running, you notice that the controller, spooler, and hdb robot probes all have green ports in infrastructure Manager and the controller and remote hub show no errors. However, you cannot open the controller GUI or contact it through the hub-to-robot connection. Only the connection from the robot to the hub, port 48002, works using Telnet. 
To address this issue, what do you need to do?
  1. Run the service iptables stop command.
  2. Run the /bin/systemctl stop iptables.service command.
  3. Create the following firewall rule on the local Linux server: 
    ACCEPT tcp - anywhere anywhere state NEW tcp dpt:48000-48100
  4. Run the /etc/init.d/niminit start-persistent command.
Correct answer: C
Question 7
Which port must be opened for the automatic_deployment_engine (ade) probe to deploy a robot on a UNIX system?
  1. 48002
  2. 48000
  3. 80
  4. 22
Correct answer: A
Question 8
For robots configured behind a firewall, which ports must be opened for robots in proxy mode? (Choose two.)
  1. Robot to hub: Ports 48000, 48001, and 48002
  2. Hub to robot: Ports 48000, 48001, and 48002
  3. Robot to hub: Port 48000
  4. Hub to robot: Port 48000
Correct answer: AD
Question 9
You can save time during robot deployment by using an answer file, which can be used with the CA UIM native installer or third-party tools. 
Which variables are REQUIRED in the answer file? (Choose four.)
  1. domain
  2. hubip
  3. robotip
  4. hubrobotname
  5. hub
Correct answer: ABDE
Explanation:
Reference: https://docops.ca.com/ca-unified-infrastructure-management/8-5-1/en/installing-ca-uim/deploy-robots/deploy-robots-in-bulk-with-a-third-party-tool-and-native-installers
Reference: https://docops.ca.com/ca-unified-infrastructure-management/8-5-1/en/installing-ca-uim/deploy-robots/deploy-robots-in-bulk-with-a-third-party-tool-and-native-installers
Question 10
You are a CA UIM administrator in a financial organization. Your manager wants you to manage and monitor the highly secure network zone. The security policies do not allow any traffic to and from the highly secure network zone over the non-standard firewall policies. The ports above 48000, which are used for CA UIM communications, are considered to be nonstandard ports. To deploy bulk robots using CA UIM, which tasks are required? 
  1. Deploy a hub in the secure network zone and set up a tunnel. 
  2. Deploy a hub in the secure network zone but do not apply any probes to it. 
  3. Deploy the discovery_agent probe on the hub in the secure network zone. 
  4. Deploy the automated_deployment_engine (ade) probe on the hub in the secure network zone. 
  5. Ensure that HTTPS port 443 is open between the hub in the secure network zone and the tunnel server.
  1. 2 only
  2. 1, 3, 4, and 5 only
  3. 1, 3, and 4 only
  4. 1 and 2 only
Correct answer: B
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!