156-215.80: Check Point Certified Security Administrator

An administrator is creating an IPsec site-to-site VPN between his corporate office and branch office. Both offices are protected by Check Point Security Gateway managed by the same Security Management Server. While configuring the VPN community to specify the pre-shared secret the administrator found that the check box to enable pre-shared secret is shared and cannot be enabled. Why does it not allow him to specify the pre-shared secret?

IPsec VPN blade should be enabled on both Security Gateway.
Pre-shared can only be used while creating a VPN between a third party vendor and Check Point Security Gateway.
Certificate based Authentication is the only authentication method available between two Security Gateway managed by the same SMS.
The Security Gateways are pre-R75.40.

Correct answer: C

ABC Corp., and have recently returned from a training course on Check Point's new advanced R80 management platform. You are presenting an in-house R80

Management to the other administrators in ABC Corp.

How will you describe the new “Publish” button in R80 Management Console?

The Publish button takes any changes an administrator has made in their management session, publishes a copy to the Check Point of R80, and then saves it to the R80 database.
The Publish button takes any changes an administrator has made in their management session and publishes a copy to the Check Point Cloud of R80 and but does not save it to the R80
The Publish button makes any changes an administrator has made in their management session visible to all other administrator sessions and saves it to the Database.
The Publish button makes any changes an administrator has made in their management session visible to the new Unified Policy session and saves it to the Database.

Correct answer: C

Explanation:

To make your changes available to other administrators, and to save the database before installing a policy, you must publish the session. When you publish a session, a new database version is created. Reference: https://sc1.checkpoint.com/documents/R80/CP_R80_SecMGMT/html_frameset.htm?topic=documents/R80/CP_R80_SecMGMT/126197

To make your changes available to other administrators, and to save the database before installing a policy, you must publish the session. When you publish a session, a new database version is created.

Reference: https://sc1.checkpoint.com/documents/R80/CP_R80_SecMGMT/html_frameset.htm?topic=documents/R80/CP_R80_SecMGMT/126197

Which of the following ClusterXL modes uses a non-unicast MAC address for the cluster IP address.

High Availability
Load Sharing Multicast
Load Sharing Pivot
Master/Backup

Correct answer: B

Explanation:

ClusterXL uses the Multicast mechanism to associate the virtual cluster IP addresses with all cluster members. By binding these IP addresses to a Multicast MAC address, it ensures that all packets sent to the cluster, acting as a gateway, will reach all members in the cluster. Reference:https://sc1.checkpoint.com/documents/R76/CP_R76_ClusterXL_AdminGuide/7292.htm

ClusterXL uses the Multicast mechanism to associate the virtual cluster IP addresses with all cluster members. By binding these IP addresses to a Multicast MAC address, it ensures that all packets sent to the cluster, acting as a gateway, will reach all members in the cluster.

Reference:

https://sc1.checkpoint.com/documents/R76/CP_R76_ClusterXL_AdminGuide/7292.htm

Fill in the blank: With the User Directory Software Blade, you can create R80 user definitions on a(an) ___________ Server.

NT domain
SMTP
LDAP
SecurID

Correct answer: C

Explanation:

Reference: https://sc1.checkpoint.com/documents/R80/CP_R80_SecMGMT/html_frameset.htm?topic=documents/R80/CP_R80_SecMGMT/126197

Which of the following is NOT a component of a Distinguished Name?

Organization Unit
Country
Common name
User container

Correct answer: D

Explanation:

Distinguished Name Components CN=common name, OU=organizational unit, O=organization, L=locality, ST=state or province, C=country name Reference: https://sc1.checkpoint.com/documents/R76/CP_R76_SecMan_WebAdmin/html_frameset.htm?topic=documents/R76/CP_R76_SecMan_WebAdmin/71950

Distinguished Name Components

CN=common name, OU=organizational unit, O=organization, L=locality, ST=state or province, C=country name

Reference: https://sc1.checkpoint.com/documents/R76/CP_R76_SecMan_WebAdmin/html_frameset.htm?topic=documents/R76/CP_R76_SecMan_WebAdmin/71950

What are the three authentication methods for SIC?

Passwords, Users, and standards-based SSL for the creation of security channels
Certificates, standards-based SSL for the creation of secure channels, and 3DES or AES128 for encryption
Packet Filtering, certificates, and 3DES or AES128 for encryption
Certificates, Passwords, and Tokens

Correct answer: B

Explanation:

Secure Internal Communication (SIC) Secure Internal Communication (SIC) lets Check Point platforms and products authenticate with each other. The SIC procedure creates a trusted status between gateways, management servers and other Check Point components. SIC is required to install polices on gateways and to send logs between gateways and management servers. These security measures make sure of the safety of SIC:Certificates for authentication Standards-based SSL for the creation of the secure channel 3DES for encryption Reference: https://sc1.checkpoint.com/documents/R76/CP_R76_SecMan_WebAdmin/html_frameset.htm?topic=documents/R76/CP_R76_SecMan_WebAdmin/71950

Secure Internal Communication (SIC)

Secure Internal Communication (SIC) lets Check Point platforms and products authenticate with each other. The SIC procedure creates a trusted status between gateways, management servers and other Check Point components. SIC is required to install polices on gateways and to send logs between gateways and management servers.

These security measures make sure of the safety of SIC:

Certificates for authentication
Standards-based SSL for the creation of the secure channel
3DES for encryption

Reference: https://sc1.checkpoint.com/documents/R76/CP_R76_SecMan_WebAdmin/html_frameset.htm?topic=documents/R76/CP_R76_SecMan_WebAdmin/71950

You have enabled “Full Log” as a tracking option to a security rule. However, you are still not seeing any data type information. What is the MOST likely reason?

Logging has disk space issues. Change logging storage options on the logging server or Security Management Server properties and install database.
Data Awareness is not enabled.
Identity Awareness is not enabled.
Logs are arriving from Pre-R80 gateways.

Correct answer: A

Explanation:

The most likely reason for the logs data to stop is the low disk space on the logging device, which can be the Management Server or the Gateway Server.

What is the order of NAT priorities?

Static NAT, IP pool NAT, hide NAT
IP pool NAT, static NAT, hide NAT
Static NAT, automatic NAT, hide NAT
Static NAT, hide NAT, IP pool NAT

Correct answer: A

Explanation:

The order of NAT priorities is:Static NAT IP Pool NAT Hide NAT Since Static NAT has all of the advantages of IP Pool NAT and more, it has a higher priority than the other NAT methods. Reference: https://sc1.checkpoint.com/documents/R77/CP_R77_Firewall_WebAdmin/6724.htm#o6919

The order of NAT priorities is:

Static NAT
IP Pool NAT
Hide NAT

Since Static NAT has all of the advantages of IP Pool NAT and more, it has a higher priority than the other NAT methods.

Reference: https://sc1.checkpoint.com/documents/R77/CP_R77_Firewall_WebAdmin/6724.htm#o6919

Which of the following is an identity acquisition method that allows a Security Gateway to identify Active Directory users and computers?

UserCheck
Active Directory Query
Account Unit Query
User Directory Query

Correct answer: B

Explanation:

AD Query extracts user and computer identity information from the Active Directory Security Event Logs. The system generates a Security Event log entry when a user or computer accesses a network resource. For example, this occurs when a user logs in, unlocks a screen, or accesses a network drive. Reference : https://sc1.checkpoint.com/documents/R76/CP_R76_IdentityAwareness_AdminGuide/62402.htm

AD Query extracts user and computer identity information from the Active Directory Security Event Logs. The system generates a Security Event log entry when a user or computer accesses a network resource. For example, this occurs when a user logs in, unlocks a screen, or accesses a network drive.

Reference : https://sc1.checkpoint.com/documents/R76/CP_R76_IdentityAwareness_AdminGuide/62402.htm

Ken wants to obtain a configuration lock from other administrator on R80 Security Management Server. He can do this via WebUI or a via CLI. Which command should be use in CLI? Choose the correct answer.

remove database lock
The database feature has one command lock database override.
override database lock
The database feature has two commands: lock database override and unlock database. Both will work.

Correct answer: D

Explanation:

Use the database feature to obtain the configuration lock. The database feature has two commands: lock database [override]. unlock database The commands do the same thing: obtain the configuration lock from another administrator. Reference: https://sc1.checkpoint.com/documents/R76/CP_R76_Gaia_WebAdmin/75697.htm#o73091

Use the database feature to obtain the configuration lock. The database feature has two commands:

lock database [override].
unlock database

The commands do the same thing: obtain the configuration lock from another administrator.

Reference: https://sc1.checkpoint.com/documents/R76/CP_R76_Gaia_WebAdmin/75697.htm#o73091

Vendor:	Checkpoint
Exam Code:	156-215.80
Exam Name:	Check Point Certified Security Administrator
Date:	May 08, 2019
File Size:	6 MB

Download Check Point Certified Security Administrator.156-215.80.SelfTestEngine.2019-05-08.275q.vcex

How to open VCEX files?

Demo Questions

Question 1

Question 2

Question 3

Question 4

Question 5

Question 6

Question 7

Question 8

Question 9

Question 10

ProfExam at a 20% markdown