Download Certifications: CCNP Security, Cisco Certified Specialist - Network Security Firepower.300-710.Braindump2go.2024-02-22.232q.vcex

Vendor: Cisco
Exam Code: 300-710
Exam Name: Certifications: CCNP Security, Cisco Certified Specialist - Network Security Firepower
Date: Feb 22, 2024
File Size: 2 MB

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Purchase
Coupon: EXAM_HUB

Discount: 20%

Demo Questions

Question 1
An organization has implemented Cisco Firepower without IPS capabilities and now wants to enable inspection for their traffic.   
They need to be able to detect protocol anomalies and utilize the Snort rule sets to detect malicious behavior. How is this accomplished?
  1. Modify the network discovery policy to detect new hosts to inspect.
  2. Modify the access control policy to redirect interesting traffic to the engine.
  3. Modify the intrusion policy to determine the minimum severity of an event to inspect.
  4. Modify the network analysis policy to process the packets for inspection.
Correct answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/670/fdm/fptd-fdm-config-guide-670/fptd-fdmintrusion.html
https://www.cisco.com/c/en/us/td/docs/security/firepower/670/fdm/fptd-fdm-config-guide-670/fptd-fdmintrusion.html
Question 2
A hospital network needs to upgrade their Cisco FMC managed devices and needs to ensure that a disaster recovery process is in place. What must be done in order to minimize downtime on the network?
  1. Configure a second circuit to an ISP for added redundancy
  2. Keep a copy of the current configuration to use as backup
  3. Configure the Cisco FMCs for failover
  4. Configure the Cisco FMC managed devices for clustering.
Correct answer: C
Question 3
With Cisco FTD software, which interface mode must be configured to passively receive traffic that passes through the appliance?
  1. ERSPAN
  2. IPS-only
  3. firewall
  4. tap
Correct answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-configguide-v64/interface_overview_for_firepower_threat_defense.html
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-configguide-v64/interface_overview_for_firepower_threat_defense.html
Question 4
A Cisco FTD device is running in transparent firewall mode with a VTEP bridge group member ingress interface.  
What must be considered by an engineer tasked with specifying a destination MAC address for a packet trace?
  1. The destination MAC address is optional if a VLAN ID value is entered
  2. Only the UDP packet type is supported
  3. The output format option for the packet logs unavailable
  4. The VLAN ID and destination MAC address are optional
Correct answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/troubleshooting_the_system.html
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/troubleshooting_the_system.html
Question 5
What is a characteristic of bridge groups on a Cisco FTD?
  1. In routed firewall mode, routing between bridge groups must pass through a routed interface.
  2. In routed firewall mode, routing between bridge groups is supported.
  3. In transparent firewall mode, routing between bridge groups is supported
  4. Routing between bridge groups is achieved only with a router-on-a-stick configuration on a connected router
Correct answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa97/configuration/general/asa-97-general-config/intro-fw.pdf
https://www.cisco.com/c/en/us/td/docs/security/asa/asa97/configuration/general/asa-97-general-config/intro-fw.pdf
Question 6
Network traffic coining from an organization's CEO must never be denied.  
Which access control policy configuration option should be used if the deployment engineer is not permitted to create a rule to allow all traffic?
  1. Configure firewall bypass.
  2. Change the intrusion policy from security to balance.
  3. Configure a trust policy for the CEO.
  4. Create a NAT policy just for the CEO.
Correct answer: C
Question 7
In a multi-tenant deployment where multiple domains are in use. Which update should be applied outside of the Global Domain?
  1. minor upgrade
  2. local import of intrusion rules
  3. Cisco Geolocation Database
  4. local import of major upgrade
Correct answer: C
Question 8
A mid-sized company is experiencing higher network bandwidth utilization due to a recent acquisition. The network operations team is asked to scale up their one Cisco FTD appliance deployment to higher capacities due to the increased network bandwidth.  
Which design option should be used to accomplish this goal?
  1. Deploy multiple Cisco FTD appliances in firewall clustering mode to increase performance.
  2. Deploy multiple Cisco FTD appliances using VPN load-balancing to scale performance.
  3. Deploy multiple Cisco FTD HA pairs to increase performance
  4. Deploy multiple Cisco FTD HA pairs in clustering mode to increase performance
Correct answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/clustering/ftd-cluster-solution.html#concept_C8502505F840451C9E600F1EED9BC18E
https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/clustering/ftd-cluster-solution.html#concept_C8502505F840451C9E600F1EED9BC18E
Question 9
An organization has seen a lot of traffic congestion on their links going out to the internet There is a Cisco Firepower device that processes all of the traffic going to the internet prior to leaving the enterprise. How is the congestion alleviated so that legitimate business traffic reaches the destination?
  1. Create a flexconfig policy to use WCCP for application aware bandwidth limiting
  2. Create a VPN policy so that direct tunnels are established to the business applications
  3. Create a NAT policy so that the Cisco Firepower device does not have to translate as many addresses
  4. Create a QoS policy rate-limiting high bandwidth applications
Correct answer: D
Question 10
An engineer configures an access control rule that deploys file policy configurations to security zone or tunnel zones, and it causes the device to restart. What is the reason for the restart?
  1. Source or destination security zones in the access control rule matches the security zones that are associated with interfaces on the target devices.
  2. The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the destination policy.
  3. Source or destination security zones in the source tunnel zone do not match the security zones that are associated with interfaces on the target devices.
  4. The source tunnel zone in the rule does not match a tunnel zone that is assigned to a tunnel rule in the source policy.
Correct answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config-guide-v623/policy_management.html
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config-guide-v623/policy_management.html
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!