Download Certifications: CCNP Security, Cisco Certified Specialist - Network Security Firepower.300-710.VCEplus.2024-08-10.175q.vcex

ProfExam Suite - Black Friday
Vendor: Cisco
Exam Code: 300-710
Exam Name: Certifications: CCNP Security, Cisco Certified Specialist - Network Security Firepower
Date: Aug 10, 2024
File Size: 3 MB
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAM_HUB

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
An engineer is setting up a new Firepower deployment and is looking at the default FMC policies to start the implementation During the initial trial phase, the organization wants to test some common Snort rules while still allowing the majority of network traffic to pass Which default policy should be used?
  1. Maximum Detection
  2. Security Over Connectivity
  3. Balanced Security and Connectivity
  4. Connectivity Over Security
Correct answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/fdm/fptd-fdm-config-guide-623/fptd-fdm-intrusion.html
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/fdm/fptd-fdm-config-guide-623/fptd-fdm-intrusion.html
Question 2
An engineer currently has a Cisco FTD device registered to the Cisco FMC and is assigned the address of 10 10.50.12. The organization is upgrading the addressing schemes and there is a requirement to convert the addresses to a format that provides an adequate amount of addresses on the network What should the engineer do to ensure that the new addressing takes effect and can be used for the Cisco FTD to Cisco FMC connection?
  1. Delete and reregister the device to Cisco FMC
  2. Update the IP addresses from IFV4 to IPv6 without deleting the device from Cisco FMC
  3. Format and reregister the device to Cisco FMC.
  4. Cisco FMC does not support devices that use IPv4 IP addresses.
Correct answer: A
Question 3
A security engineer is configuring an Access Control Policy for multiple branch locations These locations share a common rule set and utilize a network object called INSIDE_NET which contains the locally significant internal network subnets at each location What technique will retain the policy consistency at each location but allow only the locally significant network subnet within the applicable rules?
  1. utilizing policy inheritance
  2. utilizing a dynamic ACP that updates from Cisco Talos
  3. creating a unique ACP per device
  4. creating an ACP with an INSIDE_NET network object and object overrides
Correct answer: D
Question 4
An engineer has been asked to show application usages automatically on a monthly basis and send the information to management What mechanism should be used to accomplish this task?
  1. event viewer
  2. reports
  3. dashboards
  4. context explorer
Correct answer: B
Question 5
With Cisco FTD integrated routing and bridging, which interface does the bridge group use to communicate with a routed interface?
  1. switch virtual
  2. bridge group member
  3. bridge virtual
  4. subinterface
Correct answer: C
Explanation:
Reference:https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-configguide-v64/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-configguide-v64/transparent_or_routed_firewall_mode_for_firepower_threat_defense.html
Question 6
A network administrator configured a NAT policy that translates a public IP address to an internal web server IP address. An access policy has also been created that allows any source to reach the public IP address on port 80.
The web server is still not reachable from the Internet on port 80.
Which configuration change is needed?
  1. The intrusion policy must be disabled for port 80.
  2. The access policy rule must be configured for the action trust.
  3. The NAT policy must be modified to translate the source IP address as well as destination IP address.
  4. The access policy must allow traffic to the internal web server IP address.
Correct answer: D
Question 7
An engineer must configure a Cisco FMC dashboard in a child domain. Which action must be taken so that the dashboard is visible to the parent domain?
  1. Add a separate tab.
  2. Adjust policy inheritance settings.
  3. Add a separate widget.
  4. Create a copy of the dashboard.
Correct answer: D
Question 8
An engineer is troubleshooting connectivity to the DNS servers from hosts behind a new Cisco FTD device. The hosts cannot send DNS queries to servers in the DMZ. Which action should the engineer take to troubleshoot this issue using the real DNS packets?
  1. Use the Connection Events dashboard to check the block reason and adjust the inspection policy as needed.
  2. Use the packet capture tool to check where the traffic is being blocked and adjust the access control or intrusion policy as needed.
  3. Use the packet tracer tool to determine at which hop the packet is being dropped.
  4. Use the show blocks command in the Threat Defense CLI tool and create a policy to allow the blocked traffic.
Correct answer: A
Question 9
A security engineer is configuring an Access Control Policy for multiple branch locations. These locations share a common rule set and utilize a network object called INSIDE_NET which contains the locally significant internal network subnets at each location. Which technique will retain the policy consistency at each location but allow only the locally significant network subnet within the applicable rules?
  1. utilizing a dynamic Access Control Policy that updates from Cisco Talos
  2. utilizing policy inheritance
  3. creating a unique Access Control Policy per device
  4. creating an Access Control Policy with an INSIDE_NET network object and object overrides
Correct answer: D
Question 10
An engineer runs the command restore remote-manager-backup location 2.2.2.2 admin /Volume/home/admin FTD408566513.zip on a Cisco FMC. After connecting to the repository, the Cisco FTD device is unable to accept the backup file.
What is the reason for this failure?
  1. The backup file is not in .cfg format.
  2. The wrong IP address is used.
  3. The backup file extension was changed from .tar to .zip.
  4. The directory location is incorrect.
Correct answer: C
Explanation:
Reference: https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKSEC-3455.pdf
Reference: https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKSEC-3455.pdf
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!