Download Fortinet NSE 4 - FortiOS 7.6 Administrator.NSE4_FGT_AD-7.6.Braindump2go.2026-03-25.50q.tqb

Vendor: Fortinet
Exam Code: NSE4_FGT_AD-7.6
Exam Name: Fortinet NSE 4 - FortiOS 7.6 Administrator
Date: Mar 25, 2026
File Size: 216 KB
Download Exam

How to open TQB files?

Files with TQB (Taurus Question Bank) extension can be opened by Taurus Exam Studio.

Download
Taurus Exam Studio

Purchase
Coupon: TAURUSSIM_20OFF

Discount: 20%

Taurus Exam Simulator Taurus Exam Simulator Taurus Exam Simulator Taurus Exam Simulator Taurus Exam Simulator

Demo Questions

Question 1
What is the primary FortiGate election process when the HA override setting is enabled?
  1.    Connected monitored ports > Priority > HA uptime > FortiGate serial number
  2.    Connected monitored ports > Priority > System uptime > FortiGate serial number
  3.    Connected monitored ports > HA uptime > Priority > FortiGate serial number
  4.    Connected monitored ports > System uptime > Priority > FortiGate serial number
Correct answer: A
Explanation:
If Override DISABLED then: ports > HA Uptime > Priority > SN.If Overrrid ENABLED then: ports > Priority > HA Uptime > SN.
If Override DISABLED then: ports > HA Uptime > Priority > SN.
If Overrrid ENABLED then: ports > Priority > HA Uptime > SN.
Question 2
An administrator wanted to configure an IPS sensor to block traffic that triggers a signature set number of times during a specific time period. How can the administrator achieve the objective?
  1.    Use IPS group signatures, set rate-mode 60.
  2.    Use IPS packet logging option with periodical filter option.
  3.    Use IPS filter, rate-mode periodical option.
  4.    Use IPS signatures, rate-mode periodical option.
Correct answer: D
Explanation:
You can also add rate-based signatures to block specific traffic when the threshold is exceeded. On the CLI, If you set the command rate-mode to periodical, FortiGate triggers the action when the threshold is reached during the configured Duration time period.
You can also add rate-based signatures to block specific traffic when the threshold is exceeded. On the CLI, If you set the command rate-mode to periodical, FortiGate triggers the action when the threshold is reached during the configured Duration time period.
Question 3
A FortiGate firewall policy is configured with active authentication, however, the user cannot authenticate when accessing a website. Which protocol must FortiGate allow even though the user cannot authenticate?
  1.    LDAP
  2.    TACASC+
  3.    Kerberos
  4.    DNS
Correct answer: D
Explanation:
A firewall policy must allow a protocol in order to show the authentication dialog that is used in active authentication (such as HTTP/HTTPS/FTP/Telnet) and DNS.
A firewall policy must allow a protocol in order to show the authentication dialog that is used in active authentication (such as HTTP/HTTPS/FTP/Telnet) and DNS.
Question 4
Refer to the exhibit, which shows a partial configuration from the remote authentication server.
Why does the FortiGate administrator need this configuration?
  1.    To set up a RADIUS server Secret.
  2.    To authenticate Any FortiGate user groups.
  3.    To authenticate and match the Training OU on the RADIUS server.
  4.    To authenticate only the Training user group.
Correct answer: D
Explanation:
The Fortinet-Group-Name attribute is used to restrict authentication to users who belong specifically to the “Training” user group on the RADIUS server.
The Fortinet-Group-Name attribute is used to restrict authentication to users who belong specifically to the “Training” user group on the RADIUS server.
Question 5
Refer to the exhibit, which shows an SD-WAN zone configuration on the FortiGate GUI.
Based on the exhibit, which statement is true?
  1.    The Underlay zone is the zone by default.
  2.    The Underlay zone contains no member.
  3.    port2 and port3 are not assigned to a zone.
  4.    The virtual-wan-link and overlay zones can be deleted.
Correct answer: B
Explanation:
Underlay is not a default zone. It is user defined and not active.
Underlay is not a default zone. It is user defined and not active.
Question 6
Which three statements explain a flow-based antivirus profile? (Choose three.)
  1.    FortiGate buffers the whole file but transmits to the client at the same time.
  2.    Flow-based inspection uses a hybrid of the scanning modes available in proxy-based inspection.
  3.    If a virus is detected, the last packet is delivered to the client.
  4.    Flow-based inspection optimizes performance compared to proxy-based inspection.
  5.    The IPS engine handles the process as a standalone.
Correct answer: A, B, D
Explanation:
Flow-based antivirus buffers the entire file while simultaneously transmitting data to the client to minimize latency.Flow-based inspection combines multiple scanning techniques from proxy-based modes for efficient detection.Flow-based inspection provides better performance by processing traffic on the fly without full proxy overhead.
Flow-based antivirus buffers the entire file while simultaneously transmitting data to the client to minimize latency.
Flow-based inspection combines multiple scanning techniques from proxy-based modes for efficient detection.
Flow-based inspection provides better performance by processing traffic on the fly without full proxy overhead.
Question 7
Refer to the exhibit. An administrator has configured an Application Overrides for the ABC.Com application signature and set the Action to Allow. This application control profile is then applied to a firewall policy that is scanning all outbound traffic. Logging is enabled in the firewall policy. To test the configuration, the administrator accessed the ABC.Com web site several times.
Why are there no logs generated under security logs for ABC.Com?
  1.    The ABC.Com Type is set as Application instead of Filter.
  2.    The ABC.Com is configured under application profile, which must be configured as a web filter profile.
  3.    The ABC.Com Action is set to Allow.
  4.    The ABC.Com is hitting the category Excessive-Bandwidth.
Correct answer: C
Explanation:
When the action is set to Allow in an application override, traffic matching this override is allowed without generating security logs because it bypasses deeper inspection and blocking.
When the action is set to Allow in an application override, traffic matching this override is allowed without generating security logs because it bypasses deeper inspection and blocking.
Question 8
Which two statements describe characteristics of automation stitches? (Choose two.)
  1.    Actions involve only devices included in the Security Fabric.
  2.    An automation stitch can have multiple triggers.
  3.    Multiple actions can run in parallel.
  4.    Triggers can involve external connectors.
Correct answer: C, D
Explanation:
Automation stitches can execute multiple actions concurrently (in parallel).Triggers for automation stitches can come from external connectors beyond just Fortinet devices.
Automation stitches can execute multiple actions concurrently (in parallel).
Triggers for automation stitches can come from external connectors beyond just Fortinet devices.
Question 9
Which three statements about SD-WAN performance SLAs are true? (Choose three.)
  1.    They rely on session loss and jitter.
  2.    They can be measured actively or passively.
  3.    They are applied in a SD-WAN rule lowest cost strategy.
  4.    They monitor the state of the FortiGate device.
  5.    All the SLAtargets can be configured.
Correct answer: B, C, E
Explanation:
FortiGate performance SLAs monitor the state of each member—whether it is alive or dead—and measures the member packet loss, latency, and jitter.When you configure a performance SLA, you can decide whether you want to monitor the link health actively or passively. In active monitoring, the performance SLA checks the health of the member periodically—by default every 500ms— sending probes from the member to one or two servers that act as a beacon. In passive monitoring, the performance SLA determines the health of a member based on the traffic passing through the member.The SLA target section is optional. It’s where you define the performance requirements of alive members (latency, jitter, and packet loss thresholds). The performance SLA uses SLA targets with some SD-WAN rule strategies, like Lowest Cost (SLA), to decide if the link is eligible for traffic steering or not.
FortiGate performance SLAs monitor the state of each member—whether it is alive or dead—and measures the member packet loss, latency, and jitter.
When you configure a performance SLA, you can decide whether you want to monitor the link health actively or passively. In active monitoring, the performance SLA checks the health of the member periodically—by default every 500ms— sending probes from the member to one or two servers that act as a beacon. In passive monitoring, the performance SLA determines the health of a member based on the traffic passing through the member.
The SLA target section is optional. It’s where you define the performance requirements of alive members (latency, jitter, and packet loss thresholds). The performance SLA uses SLA targets with some SD-WAN rule strategies, like Lowest Cost (SLA), to decide if the link is eligible for traffic steering or not.
Question 10
Which two statements are true about an HA cluster? (Choose two.)
  1.    An HA cluster cannot have both in-band and out-of-band management interfaces at the same time.
  2.    Link failover triggers a failover if the administrator sets the interface down on the primary device.
  3.    When sniffing the heartbeat interface, the administrator must see the IP address 169.254.0.2.
  4.    HA incremental synchronization includes FIB entries and IPsec SAs.
Correct answer: B, D
Explanation:
Incremental synchronization also synchronizes other dynamic configuration information such as the DHCP server address lease database, routing table updates, IPsec SAs, MAC address tables, and so on.HA propagates more than just configuration details. Some runtime data, such as DHCP leases and FIB entries, are also synchronized.
Incremental synchronization also synchronizes other dynamic configuration information such as the DHCP server address lease database, routing table updates, IPsec SAs, MAC address tables, and so on.
HA propagates more than just configuration details. Some runtime data, such as DHCP leases and FIB entries, are also synchronized.
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX FILES

Use ProfExam Simulator to open VCEX files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!