Download Using HPE OneView.HPE2-T37.VCEplus.2024-11-30.54q.vcex

ProfExam Suite - Black Friday
Vendor: HP
Exam Code: HPE2-T37
Exam Name: Using HPE OneView
Date: Nov 30, 2024
File Size: 2 MB
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAM_HUB

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
Refer to the exhibit.
 
 
You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?
  1. The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.
  2. HPE OneView was restored from a backup that created inconsistency with the server profile template.
  3. Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.
  4. Changes to the server profile were implemented directly on the server profile.
Correct answer: D
Question 2
Which types of support dump can be created using HPE OneView? (Select two.)
  1. Enclosure group support dump
  2. Appliance support dump
  3. Firmware deployment support dump
  4. Logical enclosure support dump
  5. Maintenance console support dump
Correct answer: BD
Question 3
Refer to the exhibit.
 
 
A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?
  1. The refresh procedure must be performed on each logical enclosure to refresh firmware.
  2. All of the components are up to date and compliant with firmware baseline.
  3. The firmware repository service must be restarted using maintenance connection.
  4. The firmware repository is not defined within firmware compliance report.
Correct answer: A
Explanation:
https://support.hpe.com/hpesc/public/docDisplay?docId=sd00001377en_us&docLocale=en_US&page=ts_fw-compliance-unavailable-troubleshooting.html
https://support.hpe.com/hpesc/public/docDisplay?docId=sd00001377en_us&docLocale=en_US&page=ts_fw-compliance-unavailable-troubleshooting.html
Question 4
A customer has to deploy 21 HPE Synergy Compute Modules in a boot from SAN setup. How this task can be simplified while keeping the profile consistent?
  1. Boot volumes can be created on demand and defined in the server profile template.
  2. Boot volumes can be prepared in advance and later presented as shared volumes to the Compute Modules.
  3. An existing volume can be replicated automatically when creating a server profile.
  4. single SAN volume can be created and utilized by all HPE Synergy Compute Modules.
Correct answer: A
Question 5
Your customer wants to optimize GenlO servers for a virtualization workload by configuring all of them with a specific workload profile in the BIOS. All of the servers are managed using HPE OneView.
How can this task be completed?
  1. Set a specific workload profile within Logical Interconnect Group and update all servers.
  2. Set a specific workload profile for all managed servers as an HPE OneView global setting.
  3. Set a specific workload profile within server profile template and update all profiles.
  4. Set a specific workload profile using IL0 interface for each individual server.
Correct answer: C
Question 6
Which of the following actions from the HPE OneView interface is available for a volume provisioned on an external array?
  1. Shrinking a volume
  2. Volume conversion
  3. Remote replication
  4. Growing a volume 
Correct answer: D
Explanation:
From the HPE OneView interface, you can grow a volume provisioned on an external array. This action allows administrators to increase the capacity of existing volumes to meet growing storage requirements without disrupting services. The ability to grow volumes is contingent on the support of the underlying storage system and available capacity.HPE OneView User Guide: Outlines the storage management capabilities, including growing volumes on supported external arrays.HPE OneView Storage Management: Provides information on managing storage resources through HPE OneView.
From the HPE OneView interface, you can grow a volume provisioned on an external array. This action allows administrators to increase the capacity of existing volumes to meet growing storage requirements without disrupting services. The ability to grow volumes is contingent on the support of the underlying storage system and available capacity.
HPE OneView User Guide: Outlines the storage management capabilities, including growing volumes on supported external arrays.
HPE OneView Storage Management: Provides information on managing storage resources through HPE OneView.
Question 7
What is the maximum number of HPE Synergy frames that can formulate a single logical enclosure when 25Gb connectivity is used for all HPE Synergy compute nodes?
  1. 21
  2. 1
  3. 3
  4. 5
Correct answer: C
Explanation:
When utilizing 25Gb connectivity for all HPE Synergy compute nodes, the maximum number of frames that can form a single logical enclosure is 3. This limitation is due to the bandwidth and port constraints associated with 25Gb interconnect modules. Logical enclosures define the management and networking domains within the Synergy infrastructure, and adhering to these limits ensures optimal performance and reliability.HPE Synergy Configuration and Compatibility Guide: Specifies the maximum number of frames in a logical enclosure when using 25Gb connectivity.HPE Synergy Networking: Discusses networking configurations and limitations for HPE Synergy frames.
When utilizing 25Gb connectivity for all HPE Synergy compute nodes, the maximum number of frames that can form a single logical enclosure is 3. This limitation is due to the bandwidth and port constraints associated with 25Gb interconnect modules. Logical enclosures define the management and networking domains within the Synergy infrastructure, and adhering to these limits ensures optimal performance and reliability.
HPE Synergy Configuration and Compatibility Guide: Specifies the maximum number of frames in a logical enclosure when using 25Gb connectivity.
HPE Synergy Networking: Discusses networking configurations and limitations for HPE Synergy frames.
Question 8
Which REST API method can be used to create a resource?
  1. POST
  2. GET
  3. DELETE
  4. PUT
Correct answer: A
Explanation:
In the context of RESTful APIs, the POST method is used to create a new resource on the server. When interacting with the HPE OneView REST API, you use the POST method to create new resources such as server profiles, networks, or volumes. This method sends data to the server to create a new subordinate of the resource identified by the URI.GET is used to retrieve information about resources.PUT is typically used to update or replace an existing resource.DELETE is used to remove a resource.HPE OneView REST API Reference Guide: Describes the use of HTTP methods in the API, specifying that POST is used for creating resources.HPE OneView API Methods: Outlines how different HTTP methods interact with HPE OneView resources.
In the context of RESTful APIs, the POST method is used to create a new resource on the server. When interacting with the HPE OneView REST API, you use the POST method to create new resources such as server profiles, networks, or volumes. This method sends data to the server to create a new subordinate of the resource identified by the URI.
GET is used to retrieve information about resources.
PUT is typically used to update or replace an existing resource.
DELETE is used to remove a resource.
HPE OneView REST API Reference Guide: Describes the use of HTTP methods in the API, specifying that POST is used for creating resources.
HPE OneView API Methods: Outlines how different HTTP methods interact with HPE OneView resources.
Question 9
Which statement about M-LAG setup is true?
  1. When combined with IRF, M-LAG will allow you to aggregate ports coming from clustered HPE Synergy Virtual Connect modules.
  2. M-LAG for HPE Synergy can be either single-homed or multi-homed, while for HPE BladeSystem only single-homed.
  3. sFLOW cannot be enabled if M-LAG is configured between HPE Synergy Virtual Connect modules in the same frame. 
  4. M-LAG has to be defined manually for HPE BladeSystem, but it is automatically configured for HPE Synergy.
Correct answer: A
Question 10
Which statement about a Logical Enclosure for HPE BladeSystem is Hue?
  1. A logical enclosure can have between 1 to 5 HPE BladeSystem c7000 enclosures.
  2. A logical enclosure must be created only for monitored HPE BladeSystem C700O enclosures.
  3. A logical enclosure is created automatically, and it is always based on a single enclosure.
  4. A logical enclosure can contain a mix of HPE BladeSystem c7000 and C3000 enclosures.
Correct answer: C
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!