HPE6-A41: Applying Aruba Switching Fundamentals for Mobility

How does a switch treat a link aggregation?

The switch treats the link aggregation as one logical link for spanning tree, but it learns MAC addresses separately on each individual interface within the aggregation.
The switch treats the link aggregation as one logical link. It assigns one spanning tree port role to the link aggregation, and it learns MAC addresses on the aggregation.
The switch treats the link aggregation as one logical link for MAC learning, but it assigns an individual spanning tree port role to each interface within the aggregation.
The switch treats each interface within the interface as a separate entity for MAC address learning; it also assigns an individual spanning tree port role to each interface.

Correct answer: B

A network administrator needs to configure a static route.

What should the administrator use as the next hop address?

the lowest IP address on the neighboring router in the path towards its destination
the IP address on the local interface that is used to egress traffic towards its destination
the IP address of the default gateway in the destination subnet
the IP address on the connected interface of a neighboring router in the path towards its destination

Correct answer: D

A network administrator just received two switches and wants to use the plug-and-play method to establish a Virtual Switching Framework (VSF) fabric with the fewest steps possible.

What must the administrator do to establish the fabric in this way?

Configure a VSF link on the commander, and enable VSF on the standby member.
Configure a VSF link on the commander, and enable VSF on me commander.
Enable VSF on both me commander and the standby member.
Configure a VSF link on both the commander and the standby member.

Correct answer: B

Explanation:

Reference: https://community.arubanetworks.com/aruba/attachments/aruba/WiredNetworks/209/1/ArubaOS%20VSF%20Configuration%20Guide.pdf#%5B%7B%22num%22%3A25%2C%22gen%22%3A0%7D%2C%7B%22name%22%3A%22XYZ%22%7D%2C69%2C237%2C0%5D

Refer to the exhibit.

Exhibit 1.

Exhibit 2.

Assume that Switch-2 is correctly configured for OSPF.

Which additional step must the administrator take to enable Switch-1 to advertise 192.168.2.0/24 to Switch-2?

Set a router ID on Switch-1.
Configure a route to advertise 192.168.2.0/24 on Switch-1.
Add Switch-2’s router ID to Switch-1’s OSPF neighbor list.
Enable OSPF on VLAN 2.

Correct answer: D

Which type of 802.11 wireless network can be hosted by an endpoint device such as a laptop?

a wireless distribution system
an ad hoc network
a wireless mesh or bridge
an infrastructure network

Correct answer: B

What is one benefit that Aruba AirWave can provide to a customer with ArubaOS switches?

It can audit switch firmware (software) and automate updates.
It can enable the switches to provide mobility controller functions for connected Instant APs (IAPs).
It can provide centralized authentication and authorization for users who log in to the switch CLI.
It can program the switches to dynamically adjust QoS settings to prioritize Skype for Business traffic.

Correct answer: A

Explanation:

Reference: https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0ahUKEwjKxOev5JfUAhXGLI8KHVYWDvEQFggnMAA&url=http%3A%2F%2Fwww.arubanetworks.com%2Fassets%2Fds%2FDS_AW.pdf&usg=AFQjCNG2mDuwxsqBI8MHZoKPpteQmEJ71g&sig2=r3FEvyQVngpJKqQVz-kIOA&cad=rja

An ArubaOS switch operates at its factory default settings. A network administrator connects the switch to a VLAN with a DHCP server. The switch-to-switch connection carries untagged traffic. The administrator wants to use Telnet log in to the switch CLI.

How should the administrator contact the switch and log in?

Contact the switch at its default IP address 172.16.0.254/24 and log in without entering a password.
Contact the switch at its default IP address 192.168.1.1/24 and log in with me default password admin.
Contact the switch at its DHCP-assigned IP address and log in without entering a password.
Contact the switch at its DHCP-assigned IP address and log in with the default password aruba.

Correct answer: B

Refer to the exhibit.

A network administrator views the configuration files on an ArubaOS switch and sees the output in the exhibit. The administrator enters this command:

Switch# boot system flash primary config config2

After the switch boots, the administrator makes some configuration changes and saves the configuration with the write memory command. The administrator then enters this command:

Switch# boot

After the switch boots, the configuration changes just made are not present.

How can the administrator restore the configuration with the changes?

Use the boot set-default command to configure the switch to use the secondary software. Then reboot the switch.
Reboot the switch and interrupt the boot process. Find the temporary file with the configuration changes and apply that file to the startup-config.
Rename the config2 file to config1. Then reboot the switch.
Use the startup-default command to configure the switch to use the config2 file with the primary software. Then reboot the switch.

Correct answer: D

For which task does a network administrator need to access the enable context on an ArubaOS switch?

to view interface statistics
to view CPU statistics
to ping an IP address
to view configuration files

Correct answer: D

A network administrator prepares an ArubaOS switch to be monitored and managed by AirWave.

Which credentials are required for AirWave to change configuration settings on the switch?

RADIUS shared secret
SNMPv2c community with manager unrestricted privileges
Telnet or SSH password
SNMPv3c user in the ManagerPriv group

Correct answer: A

Vendor:	HP
Exam Code:	HPE6-A41
Exam Name:	Applying Aruba Switching Fundamentals for Mobility
Date:	Nov 28, 2018
File Size:	3 MB

Download Applying Aruba Switching Fundamentals for Mobility.HPE6-A41.TestKing.2018-11-28.70q.vcex

How to open VCEX files?

Demo Questions

Question 1

Question 2

Question 3

Question 4

Question 5

Question 6

Question 7

Question 8

Question 9

Question 10

ProfExam at a 20% markdown