Download HPE Network Switching Professional.HPE7-A08.ExamTopics.2026-04-03.135q.tqb

Vendor: HP
Exam Code: HPE7-A08
Exam Name: HPE Network Switching Professional
Date: Apr 03, 2026
File Size: 6 MB
Download Exam

How to open TQB files?

Files with TQB (Taurus Question Bank) extension can be opened by Taurus Exam Studio.

Download
Taurus Exam Studio

Purchase
Coupon: TAURUSSIM_20OFF

Discount: 20%

Taurus Exam Simulator Taurus Exam Simulator Taurus Exam Simulator Taurus Exam Simulator Taurus Exam Simulator

Demo Questions

Question 1
After enabling 802.1X authentication on all switch ports connected to AOS10 access points, users joining SSIDs in bridge mode no longer receive an IP address. Users of tunnel mode SSIDs are unaffected. What should be done to resolve the issue?
  1. Enable device auth-mode for the assigned AP role.
  2. Increase the client-limit value on all ports to 99.
  3. Enable MAC authentication on all switch ports.
  4. Configure 802.1X on all client devices.
Correct answer: A
Question 2
Based on the given output from an HPE Aruba Networking CX 6300:
Which statement about the output above is true?
  1. The defined route map is used in BGP with neighbor remote-as export.
  2. The advertised AS path is longer than by default.
  3. The advertised routes have a MED value of 100.
  4. The advertised AS paths are configured in an IP prefix-list.
Correct answer: B
Question 3
Match each network requirement to the most appropriate routing protocol. Options may be used more than once.
Correct answer: To work with this question, an Exam Simulator is required.
Question 4
What should you configure for an interface connected to a device you cannot trust to assign DSCP markings? (Choose two.)
  1. Apply a dscp-map to the interface to assign a Local Priority value.
  2. Configure ‘qos trust none’.
  3. Apply a classifier-based policy to the interface to assign a Local Priority value.
  4. Configure ‘qos trust cos’.
Correct answer: B, C
Question 5
Refer to the exhibit.
A senior network architect has created the configuration above. You are implementing the set up in building A and B. The actual fiber distance between the building locations is: 350m /1,148ft utilizing OM4 cabling.
What needs to be changed on the configuration based on the actual environmental conditions to complete the installation?
  1. Change the 10SR optics to 25LR optics to support distances over 300m / 984ft
  2. Change the 10SR optics to 10LR optics to support distances over 300m / 984ft
  3. Change the 10SR optics to 10SR / MMF C-Class XCVR OM4 to support up to 400m / 1312ft distance
  4. Change the 10SR optics to 25SR optics to support distances over 300m / 984ft
Correct answer: C
Question 6
You’ve rebooted sw-agg2 in a VSX configuration in an attempt to live-upgrade the cluster, and then you see this condition:
What would be the correct way to live-upgrade the VSX cluster?
  1. Use the issu update-software option.
  2. Always reload the primary switch first with the new image.
  3. Use vsx update-software option.
  4. Set the VSX to compatibility mode first, before rebooting the secondary switch.
Correct answer: C
Question 7
Your customer’s CX switches are managed in HPE Aruba Networking Central. If a VSX primary switch is accidentally powered off, which alert will be triggered?
  1. Switch Reboot
  2. Switch Disconnected
  3. Switch Stack Conductor Change
  4. Switch STP Root Change
Correct answer: B
Question 8
A Linux SFTP server is configured for IP address 192.168.1.100, and the CX8325 switch has a managed IP address 192.168.1.200.
How can you backup the saved switch configuration to a remote location?
  1. Use the command scp [email protected]:/ running-config on the SFTP server.
  2. Use the command scp [email protected]:/ startup-config on the SFTP server.
  3. Use the command copy running-config sftp://[email protected]/switch_config_cfg vrf default on the switch.
  4. Use the command copy startup-config sftp://[email protected]/switch_config.cfg vrf mgmt on the switch.
Correct answer: D
Question 9
Two companies have merged, and BGP is used for routing. The customer has informed you that they currently have about 3800 routes in the routing table and would like to keep the total number of routes below 5000.
A BGP routing table from the company to be merged is provided as an example below:
Based on the provided example of the BGP routing table from the merging company, what should the customer consider to achieve the routing table size requirement?
  1. Advertise routes only using a primary path
  2. Enforce routing policies with aggregation
  3. Import only 0.0.0.0/0 route
  4. Set the route metrics equal for each prefix
Correct answer: B
Question 10
You are troubleshooting a complex routing issue after a recent change. Your customer has just called and reported that the issue now impacts all users. What should you do next?
  1. Collect a ‘show tech’ and log a case with TAC.
  2. Restore the last-known working configuration.
  3. Ask the customer to send logs from each user.
  4. Explain to the customer what the issue is.
Correct answer: B
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX FILES

Use ProfExam Simulator to open VCEX files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!