Download HCIA-Datacom V1-0.H12-811.VCEplus.2024-11-24.89q.tqb

ProfExam Suite - Black Friday
Vendor: Huawei
Exam Code: H12-811
Exam Name: HCIA-Datacom V1-0
Date: Nov 24, 2024
File Size: 1 MB
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAM_HUB

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
The network shown in the figure below. The router receives a data packet with a destination IP address of 11.0.12.1 from host A. After this data is forwarded by the router, what are the destination MAC and destination IP?)(Single-choice question)
 
  1. MAC-C. 11.0.12.1
  2. MAC-B. 11.0.12.1
  3. MAC-D. 10.0.12.2
  4. MAC-D. 11.0.12.1
Correct answer: B
Question 2
There are multiple route entries to the same destination network in the routing table. These routes are called? ()
  1. Suboptimal routing
  2. Multipath routing
  3. Default route
  4. Equal cost routing
Correct answer: D
Question 3
What is the priority value of the direct route entry? ()
  1. 0
  2. 30
  3. 10
  4. 20
Correct answer: A
Question 4
As shown in the figure below. Host A and Host B cannot communicate. ()(True or False)
 
  1. True
  2. False
Correct answer: B
Question 5
What is wrong about the description of the information as shown in the figure? () (Single-choice question)
(RI) display interface g0/0/0
GlgabltEtherneto/0/0 current state :Adainistratively DOWN Line protocol current state :DOWN
  1. GigbitEthernet (/0/0 interface is connected to a wrong cable
  2. The GigbitEthernet0/0/0 interface is not configured with an IP address
  3. The GigbitEthernet0/0/0 interface was manually closed by the administrator
  4. GigbitEthernet (0/0/0 interface does not enable dynamic routing protocol
Correct answer: C
Question 6
The ACL configuration information of a certain router is shown in the figure. Which of the following statements is correct? () (Single-choice question)
 
  1. The packet whose source IP address is 192.168.1.254 is matched by the permit rule
  2. Packets with source IP addresses of 192.168.1.1 and 192.168.1.254 are matched by the permit rule
  3. The packet with the source IP address of 192.168.1.1 is matched by the pemit rule
  4. The packet with the source IP address 192.168.1.1 is matched by the deny rule
Correct answer: C
Question 7
The administrator made the configuration on the router as shown in the figure. At the same time, the administrator wants to assign a shorter lease period to the DHCP address. Which of the following commands should be used? () (Single-choice question) ip pool pooll netyork10.10.10.0ask255.255.255.0 gateway-list 10.10.10.1
  1. Lease 0
  2. Dhcp select relay
  3. Lease day 0 hour 10
  4. Lease 24
Correct answer: C
Question 8
As shown in the figure, the G0/0/0 and G0/0/1 interfaces of RTA are connected to two different network segments. RTA is the gateway of these two networks. Before host A sends data to host C, will it send an ARP Request to obtain O's MAC address? () (Single-choice question)
 
  1. SW
  2. Host C
  3. G0/0/1 interface of RTA
  4. G0/0/0 interface of RTA
Correct answer: D
Question 9
As shown in the picture. About OSPF topology and configuration. Which of the following statements is correct? () (Single-choice question)
 
  1. R1 and R2 can establish a stable OSPF neighbor relationship
  2. R1 is more likely to become DR than R2, because its interface DR priority value is smaller
  3. As long as the interface network type of R1 is restored to the default broadcast type, R1 and R2 can establish a stable neighbor relationship
  4. As long as the interface network type of R1 is restored to the default broadcast type, and the hello time is adjusted to 10s, R1 and R2 can establish a stable neighbor relationship
Correct answer: D
Question 10
The configuration information of a certain port of the switch is shown in the figure. Which of the following statements is wrong? () (Single-choice question)
 
  1. The port type is Hybrid
  2. If the VLAN TAG carried in the data frame is 200, the switch will strip off the VLAN TAG and send it out
  3. If the port receives a data frame without VLAN TAG, the switch needs to add VLAN TAG100
  4. If the VLAN TAG carried in the data frame is 100, the switch will strip off the VLAN TAG and send it out
Correct answer: D
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!