Download IBM Spectrum Protect V8.1 Implementation.C9060-521.ActualTests.2019-02-25.68q.vcex

Vendor: IBM
Exam Code: C9060-521
Exam Name: IBM Spectrum Protect V8.1 Implementation
Date: Feb 25, 2019
File Size: 75 KB
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: EXAM_HUB

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
What must occur before adding one or more spoke servers to the hub server?
  1. grant administrative privileges to spoke servers
  2. define hub server as the target server
  3. install IBM Spectrum Protect Operations Center on spoke servers
  4. define server-to-server communications between hub and spoke severs
Correct answer: D
Explanation:
When you install the IBM Spectrum Protect server, the default configuration requires secure communication by using the Secure Sockets Layer (SSL) or Transport Layer Security (TLS) protocol. Unless this requirement was disabled for both the hub and the spoke servers, you must add the certificate of the spoke server to the truststore file of the hub server. References: https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.0/srv.solutions/t_msdisk_add_spoke.html
When you install the IBM Spectrum Protect server, the default configuration requires secure communication by using the Secure Sockets Layer (SSL) or Transport Layer Security (TLS) protocol. Unless this requirement was disabled for both the hub and the spoke servers, you must add the certificate of the spoke server to the truststore file of the hub server. 
References: https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.0/srv.solutions/t_msdisk_add_spoke.html
Question 2
What information is displayed by the query cleanup command?
  1. information about damaged files to exclude before running the conversion
  2. information about damaged files that were transferred to the target container during conversion
  3. information about damaged files that were repaired during conversion
  4. information about damaged files that are identified in a source storage pool during conversion
Correct answer: D
Explanation:
Use by the query cleanup command to display information about damaged files that are identified during a storage pool conversion process. References: https://www.ibm.com/support/knowledgecenter/SSGSG7_7.1.6/srv.reference/r_cmd_cleanup_query.html
Use by the query cleanup command to display information about damaged files that are identified during a storage pool conversion process. 
References: https://www.ibm.com/support/knowledgecenter/SSGSG7_7.1.6/srv.reference/r_cmd_cleanup_query.html
Question 3
Which option is added to ensure that all of the commands before the next SERIAL command complete before the script continues when scripting multiple commands in PARALLEL?
  1. WAIT=ON
  2. CONTINUE=NO
  3. PRIORITY=1
  4. WAIT=YES
Correct answer: D
Explanation:
Wait Specifies whether to wait for the server to complete processing this command in the foreground. The default is NO. Possible values are:No  Specifies that the server processes this command in the background. Use the QUERY PROCESS command to monitor the background processing of this command. Yes Specifies that the server processes this command in the foreground. You wait for the command to complete before continuing with other tasks. The server then displays the output messages to the administrative client when the command completes. If you are backing up multiple file systems, all backup processes must complete before the command is complete. References: IBM Spectrum Protect for Windows, Version 8.1.0, Administrator's Reference, page 72https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.0/srv.reference/b_srv_admin_ref_windows2.pdf
Wait 
Specifies whether to wait for the server to complete processing this command in the foreground. The default is NO. Possible values are:
  • No  
    Specifies that the server processes this command in the background. Use the QUERY PROCESS command to monitor the background processing of this command. 
  • Yes 
    Specifies that the server processes this command in the foreground. You wait for the command to complete before continuing with other tasks. The server then displays the output messages to the administrative client when the command completes. If you are backing up multiple file systems, all backup processes must complete before the command is complete. 
References: IBM Spectrum Protect for Windows, Version 8.1.0, Administrator's Reference, page 72
https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.0/srv.reference/b_srv_admin_ref_windows2.pdf
Question 4
How do administrators find out they have been assigned an alert and view the details of that alert?
  1. Administrators log in to the Operations Center and view the Alerts page.
  2. Administrators are notified daily by email of any alerts that are assigned to their ID.
  3. Administrators are sent a text message that provides details of the assigned alert.
  4. Administrators must query the activity log to view alerts.
Correct answer: A
Explanation:
The Operations Center includes an Overview page where you can view high-level status information. From the Overview page, you can navigate to other pages that provide more details. Most of the Administrative activities like Adding Client node, monitoring backup, Alerts, Network Traffic, Storage Pools, Maintenance and few other features only can be Performed with Operation Center. References: http://techiessite.com/access-operate-tivoli-storage-manager-567/
The Operations Center includes an Overview page where you can view high-level status information. From the Overview page, you can navigate to other pages that provide more details. Most of the Administrative activities like Adding Client node, monitoring backup, Alerts, Network Traffic, Storage Pools, Maintenance and few other features only can be Performed with Operation Center. 
References: http://techiessite.com/access-operate-tivoli-storage-manager-567/
Question 5
How is storage pool automatic migration started?
  1. increasing the High migration threshold to 100
  2. lowering the High migration threshold to 0
  3. increasing the LOw migration threshold to 100
  4. lowering the LOw migration threshold to 0
Correct answer: D
Explanation:
To empty the storage pool, set LOWMIG=0. Incorrect Answers:A: To prevent automatic migration from running, set the HIGHMIG attribute of the storage pool definition to 100.B: Migration occurs regardless of the value of the HIGHMIG parameter.C: You can specify a number from 0 to 99 for the Low migration optional parameter.References: https://www.ibm.com/support/knowledgecenter/SSGSG7_7.1.7/srv.reference/r_cmd_stgpool_migrate.html
To empty the storage pool, set LOWMIG=0. 
Incorrect Answers:
A: To prevent automatic migration from running, set the HIGHMIG attribute of the storage pool definition to 100.
B: Migration occurs regardless of the value of the HIGHMIG parameter.
C: You can specify a number from 0 to 99 for the Low migration optional parameter.
References: https://www.ibm.com/support/knowledgecenter/SSGSG7_7.1.7/srv.reference/r_cmd_stgpool_migrate.html
Question 6
What are two ways to determine when the IBM Spectrum Protect Server database was last backed up? (Select two.)
  1. Run the QUERY DBSPACE F=D administrative command.
  2. Run the QUERY VOLHIST TYPE=BACKUPFULL administrative command.
  3. Run the SHOW DB administrative command.
  4. Run the QUERY DB F=D administrative command.
  5. Click the Servers pod of the IBM Spectrum Protect Operations Center.
Correct answer: BE
Question 7
Which component is used to transfer data on IBM Spectrum Protect for Virtual Environments?
  1. IBM Spectrum Protect Manager server
  2. vMotion Server
  3. vStorage Backup Server
  4. IBM Spectrum Protect Data Mover
Correct answer: D
Explanation:
The data mover is part of the IBM Spectrum Protect™ for Virtual Environments: Data Protection for VMware program that backs up VMs to the IBM Spectrum Protect server. The data mover resides on the server where Data Protection for VMware is installed.References: https://www.ibm.com/support/knowledgecenter/SSERB6_8.1.0/ve.user/t_ve_dpext_cfg_datamover.html
The data mover is part of the IBM Spectrum Protect™ for Virtual Environments: Data Protection for VMware program that backs up VMs to the IBM Spectrum Protect server. The data mover resides on the server where Data Protection for VMware is installed.
References: https://www.ibm.com/support/knowledgecenter/SSERB6_8.1.0/ve.user/t_ve_dpext_cfg_datamover.html
Question 8
Which two empty recovery log directories must be defined before configuration of the IBM Spectrum Protect server instance? (Select two.)
  1. Failover log directory
  2. Mirror log directory
  3. Active log directory
  4. DB2 transaction log directory
  5. Archive log directory
Correct answer: CE
Explanation:
IBM Spectrum Protect Configuration best practices include: separate the server database, the active log, the archive log, and disk storage pools from each other.References: https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.0/perf/t_optim_config.html
IBM Spectrum Protect Configuration best practices include: separate the server database, the active log, the archive log, and disk storage pools from each other.
References: https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.0/perf/t_optim_config.html
Question 9
In a customer environment, there are two IBM Spectrum Protect servers, ORION and TITAN, managing the backups for the entire data center. Server to server communication has been configured, however command routing fails. Both these servers are reachable over the TCP/IP network. What is the first step to diagnose this problem?
  1. Issue the command PING SERVER ORION from ORION server console.
  2. Issue the command PING SERVER ORION from ORION server administrative command line.
  3. Issue the command PING SERVER ORION from TITAN server administrative command line.
  4. Issue the command PING SERVER ORION from TITAN server console.
Correct answer: C
Explanation:
Open a command prompt, the server administrative command line, on the one server and ping the other server to make sure communication is active and that a firewall is not interferring. Note: The administrative command-line client is a program that runs on a file server, workstation, or mainframe. It is installed as part of the IBM Spectrum Protect server installation process. The administrative client can be accessed remotely.From the administrative client, you can issue any server commands. References: http://www-01.ibm.com/support/docview.wss?uid=swg21640744
Open a command prompt, the server administrative command line, on the one server and ping the other server to make sure communication is active and that a firewall is not interferring. 
Note: The administrative command-line client is a program that runs on a file server, workstation, or mainframe. It is installed as part of the IBM Spectrum Protect server installation process. The administrative client can be accessed remotely.
From the administrative client, you can issue any server commands. 
References: http://www-01.ibm.com/support/docview.wss?uid=swg21640744
Question 10
Which minimum parameter is required in the Windows client options file to set up the IBM Spectrum Protect Administrative Command Line Client communication with the IBM Spectrum Protect Server?
  1. SERVERNAME
  2. SERVERADDRESS
  3. TCPSERVERADDRESS
  4. TCPCLIENTADDRESS
Correct answer: C
Explanation:
In all administrative client modes, you can use options to modify administrative client session responses. TCPServeraddress specifies a TCP/IP server address for an IBM Spectrum Protect server. The TCPSERVERADDRESS option is only supported by administrative clients that are running on Windows operating systems and is valid on the Windows administrative client command line. Incorrect Answers:A: Windows clients use the server name to identify which passwords belong to which servers. Changing the server name after the clients are connected forces the clients to reenter the passwords.References: https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.0/srv.reference/r_cmdline_adclient_options.htmlIBM Spectrum Protect for Windows, Version 8.1.0, Administrator's Reference, page 1266
In all administrative client modes, you can use options to modify administrative client session responses. 
TCPServeraddress specifies a TCP/IP server address for an IBM Spectrum Protect server. The TCPSERVERADDRESS option is only supported by administrative clients that are running on Windows operating systems and is valid on the Windows administrative client command line. 
Incorrect Answers:
A: Windows clients use the server name to identify which passwords belong to which servers. Changing the server name after the clients are connected forces the clients to reenter the passwords.
References: https://www.ibm.com/support/knowledgecenter/SSEQVQ_8.1.0/srv.reference/r_cmdline_adclient_options.html
IBM Spectrum Protect for Windows, Version 8.1.0, Administrator's Reference, page 1266
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX AND EXAM FILES

Use ProfExam Simulator to open VCEX and EXAM files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!