Download Nutanix Certified Services Core Infrastructure Professional.NCS-CORE.ExamTopics.2025-10-08.32q.vcex

Vendor: Nutanix
Exam Code: NCS-CORE
Exam Name: Nutanix Certified Services Core Infrastructure Professional
Date: Oct 08, 2025
File Size: 299 KB
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: TAURUSSIM_20OFF

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
A consultant asks a customer to verify the ToR Switch data port configuration was done according to Nutanix best practices. The switch configuration must simplify future deployments and expansions.
Which two configuration actions will satisfy this requirement? (Choose two.)
  1. Disable multicast and broadcast flood optimizations.
  2. Configure the CVM and hypervisor host VLAN as the native.
  3. Use a tagged VLAN for the CVM and hypervisor hosts.
  4. Configure the connected switch ports as access.
Correct answer: BD
Explanation:
AB: 3BD: 5 - Mosted
AB: 3BD: 5 - Mosted
Question 2
After imaging the nodes and creating the cluster successfully in a sandbox environment, the consultant connects the cluster to the customer’s Production network. However, notices Prism Element Alerts Dashboard is displaying multiple errors.
What is causing this issue?
  1. The cluster Virtual IP Address (VIP) was not set up during the process.
  2. The cluster was not stopped prior to connecting to the customer network.
  3. Foundation did not create the cluster successfully.
  4. The consultant did not run Nutanix Cluster Check (NCC).
Correct answer: B
Explanation:
B: 3 - Mosted
B: 3 - Mosted
Question 3
After an onsite cluster deployment, a consultant prepares the deliverables for a project closeout.
Which two data in the As-Built Guide require adjustment or might be missing completely? (Choose two.)
  1. Cluster Information
  2. AHV Host Information
  3. Nutanix Node Port Layout
  4. Physical Rack Layout
Correct answer: BC
Explanation:
CD: 2 - Mosted
CD: 2 - Mosted
Question 4
In preparing to install a new cluster for a company, a consultant needs to complete an installation worksheet.
Which values must be documented prior to initial base system setup?
  1. Hypervisor. CVM, and IPMI IP Addresses
  2. Prism Central IP Address
  3. DNS and NTP IP Addresses
  4. Block Serial Numbers
Correct answer: A
Explanation:
A: 6 - Mosted
A: 6 - Mosted
Question 5
The installation process stops before imaging any of the nodes and an error message is displayed notifying the IPMI IP address is unreachable.
What should consultant do to fix the issue?
  1. Check the service. log and the individual node log files for more detailed information.
  2. If the nodes are in the same subnet go to the Cluster page and configure multi-homing.
  3. Ensure the Foundation VM is not in the same broadcast domain as the Controller VMs.
  4. Re-try Foundation using a non-flat switch.
Correct answer: A
Explanation:
A: 4 - Mosted
A: 4 - Mosted
Question 6
During a Site Readiness Check, a customer informed the consultant that there is no NTP server currently configured in the environment.
Which two statements should the consultant consider for continuing the cluster deployment? (Choose two.)
  1. An NTP server is not required for cluster Foundation and can be added later.
  2. At least one external NTP server must be used to complete Foundation process.
  3. At least 3 NTP servers must be provided in a comma-separated list.
  4. If an NTP server is provided using FQDN, a DNS server is required.
Correct answer: BD
Explanation:
AD: 2 - Mosted
AD: 2 - Mosted
Question 7
Which subnet should a consultant be aware is reserved for internal connectivity within a Nutanix cluster?
  1. 192.168.5.0/26
  2. 192.168.254.0/24
  3. 192.168.5.0/24
  4. 192.168.5.0/23
Correct answer: C
Explanation:
C: 1
C: 1
Question 8
A consultant is setting up a new install of Nutanix Files for a customer, but receives this error when attempting to join the customer’s Active Directory domain:
File Server <FileServerName> could not join the Domain because User credentials failed with error - Unable to connect to WORKGROUP ads_connect: No logon servers
The consultant has already verified the domain credentials provided by the customer are valid and have the correct permissions.
What is the most likely cause in this scenario for a domain-join failure when setting up Nutanix Files?
  1. The FSVMs storage network must be in the same network as the logon servers.
  2. The client network is failing to communicate with the customer’s domain controllers due to a missing network firewall port requirement.
  3. The FSVMs must first be manually added to a site mapping in Active Directory before they can be authorized to communicate with the logon servers.
  4. The client network is failing to communicate with the customer’s domain controllers due to mismatched MTU sizes.
Correct answer: B
Explanation:
C: 2
C: 2
Question 9
During the knowledge transfer session, a consultant conducts a storage management demo. In the Creating a Storage Container workflow, the customer notices the Reserved Capacity parameter and asks for best practices related to it.
How should the consultant respond?
  1. Nutanix recommends to configure at least 2 storage pools with at least one storage container each.
  2. Do not reserve less than 90% of the total space in the storage pool.
  3. Reserve capacity for a storage container only if the storage pool consists of multiple storage containers.
  4. Reserve capacity for a storage container only if the storage pool consists of single storage container.
Correct answer: C
Explanation:
C: 5 - Mosted
C: 5 - Mosted
Question 10
In which two ways can the IPMI address be set on a Nutanix hardware installation? (Choose two.)
  1. Nutanix Network Crashcart
  2. ipmitool
  3. BIOS configuration
  4. iLO configuration utility
Correct answer: BC
Explanation:
BC: 5 - Mosted
BC: 5 - Mosted
Question 11
Refer to the exhibit.
A Foundation install must be done on four NX nodes for a new customer. A consultant need to set up the network onsite before imaging the nodes through the Foundation tool.
The nodes are equipped with two SFP28 25GbE NICs with dual ports, and a 10GBase-T NIC with dual ports as well. The customer’s ToR switches are 25GbE datacenter switches, already in production.
What is the appropriate hardware to perform the most reliable imaging of these NX nodes?
  1. The 25GbE production switches, 4 DAC cables, only one Ethernet cable with a 1GBase-T GBIC, and a laptop.
  2. A flat Ethernet switch, 9 Ethernet cables, and a laptop.
  3. The 25GbE production switches, 4 DAC cables and 5 Ethernet cables with a flat Ethernet switch, and a laptop.
  4. A flat Ethernet switch, 4 compatible 1GBase-T GBICs, five Ethernet cables and a laptop.
Correct answer: D
Explanation:
B: 1C: 2 - Mosted
B: 1C: 2 - Mosted
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX FILES

Use ProfExam Simulator to open VCEX files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!