Download VMware Cloud Foundation 9.0 Architect.2V0-13.25.CertDumps.2025-12-12.60q.vcex

Vendor: VMware
Exam Code: 2V0-13.25
Exam Name: VMware Cloud Foundation 9.0 Architect
Date: Dec 12, 2025
File Size: 45 KB
Download Exam

How to open VCEX files?

Files with VCEX extension can be opened by ProfExam Simulator.

Download
ProfExam Simulator

Purchase
Coupon: TAURUSSIM_20OFF

Discount: 20%

ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator ProfExam Simulator

Demo Questions

Question 1
Why would an architect specify the default NSX segment profiles in a VMware Cloud Foundation (VCF) design?
  1. Default segment profiles provide sufficient security and operational baseline settings for most common workloads and simplify lifecycle management.
  2. Default segment profiles offer enhanced performance and are automatically optimized for overlay traffic.
  3. Default segment profiles enable distributed firewall policy enforcement and avoid the need for overlay segments.
  4. Default segment profiles are required for VLAN-backed segments and cannot be overridden.
Correct answer: A
Question 2
An architect is responsible for designing a new VMware Cloud Foundation (VCF)-based Private Cloud solution. During the requirements gathering workshop with key customer stakeholders, the following information was captured:
The solution must support running 50,000 workloads concurrently across all sites.
The solution must support the concurrent deployment of up to 10 workloads.
When creating the design document, which design quality should be used to classify the stated requirements?
  1. Performance
  2. Availability
  3. Recoverability
  4. Manageability
Correct answer: A
Question 3
An architect is developing a VMware Cloud Foundation (VCF) solution with NSX VPC Full Services Model for single tenant with the following requirement:
The configuration must prevent advertisements from being dropped by the BGP loop detection check.
When designing the network architecture to support this solution, what element should be considered as part of the physical network design?
  1. Use a unique, private BGP AS number for each Tier-0 gateway.
  2. Configure edge datapath interface to transports only TEP traffic.
  3. Use iBGP as the routing protocol between the Tier-0 gateway and the physical network.
  4. Adjust the default BGP timers.
Correct answer: A
Question 4
An architect is designing the network model for a new VMware Cloud Foundation (VCF) solution. During the requirements gathering phase, the customer stated that the VCF solution must comply with the organization's security policy for traffic separation. The customer provided the architect with the following information from the policy:
The physical network architecture is divided into multiple security zones.
Traffic is not permitted to traverse between the zones with the exception of pre-approved monitoring tools.
Physical servers may not may connected to multiple zones via a single network interface.
Management and Storage traffic must be kept within network zone 1.
Workload traffic must be kept within network zone 2.
The architect makes a design decision to use two vSphere Distributed Switches per cluster for both the Management and VI Workload domains.
Which two additional design decisions should the architect include in the virtual networking design for the separation of traffic between the vSphere Distributed Switches? (Choose two.)
  1. Configure one vSphere Distributed Switch for ESX Management, Storage and vMotion traffic.
  2. Configure one vSphere Distributed Switch for all workload traffic and all NSX - Host and Edge TEP/Edge Uplinks.
  3. Configure one vSphere Distributed Switch for ESX Management, Storage, vMotion traffic and NSX - Host and Edge TEP/Edge Uplinks.
  4. Configure one vSphere Distributed Switch for all NSX - Host and Edge TEP/Edge Uplinks. E. Configure one vSphere Distributed Switch for all storage traffic.
Correct answer: AB
Question 5
During a VMware Cloud Foundation (VCF) architectural design workshop, one of the stakeholders made the following comment:
"The company has just used the remaining budget to purchase eight vSAN Ready Nodes for this project."
How would the architect classify this statement within the conceptual model document?
  1. Constraint
  2. Assumption
  3. Requirement
  4. Risk
Correct answer: A
Question 6
An architect is responsible for designing a new VMware Cloud Foundation (VCF)-based private cloud. During the discovery workshops, the following information was captured from key customer stakeholders:
The private cloud will operate with three different monitoring levels:
For the Self-Managed Service, the solution will be responsible for monitoring the virtual machine construct only.
For the OS Managed Service, the solution will be responsible for monitoring operating system level metrics and virtual machine constructs.
For the Fully Managed Service, the solution will be responsible for monitoring approved infrastructure applications, operating system level metrics, and virtual machine constructs.
The approved infrastructure applications are: Microsoft IIS, Microsoft SQL Server, MySQL, PostgresSQL, Tomcat Server, and Apache HTTPD.
For an application team to be able to deploy workloads into the private cloud, each workload must subscribe to a monitoring level at request time or when the service is onboarded.
The solution must ensure minimal management overhead for the ongoing management monitoring agents.
Which two design decision should the architect make to meet the stated monitoring requirements? (Choose two.)
  1. Deploy the Open Source Telegraf Agent for all workloads that subscribe to the Fully Managed service.
  2. Configure the Service Discovery for all workloads that subscribe to the Self-Managed service.
  3. Deploy the Managed Telegraf Agent for all workloads that subscribe to the Fully Managed service.
  4. Deploy the Managed Telegraf Agent for all workloads that subscribe Self-Managed service.
  5. Deploy the Managed Telegraf Agent for all workloads that subscribe to the OS Managed service.
Correct answer: CE
Question 7
An architect is responsible for designing a new VMware Cloud Foundation (VCF)-based Private Cloud solution. During the requirements gathering workshop with key customer stakeholders, the following information was captured:
The solution must ensure all components are configured with SSL certificates that have been signed by the corporate Certificate Authority.
The solution must ensure that users with administrative access are authenticated through an approved Identity Provider.
When creating the design document, which design quality should be used to classify the stated requirements?
  1. Security
  2. Recoverability
  3. Manageability
  4. Availability
Correct answer: A
Question 8
An architect is responsible for designing a new VMware Cloud Foundation (VCF)-based Private Cloud solution. During the requirements gathering workshop with key customer stakeholders, the following information was captured:
In the event of a disaster affecting the primary site, all tier 1 production services must be restored to the secondary site within 1 hour.
In the event of a disaster affecting the primary site, all tier 3 production services must be restored to the secondary site within 8 hours.
When creating the design document, which design quality should be used to classify the stated requirements?
  1. Manageability
  2. Recoverability
  3. Availability
  4. Performance
Correct answer: B
Question 9
A financial services company is deploying a VMware Cloud Foundation (VCF)-based solution for its core banking applications. The architect needs to ensure that the design can handle peak transaction loads while maintaining the performance SLA.
Which two approaches should be included in the design validation strategy? (Choose two.)
  1. Conduct stress testing using representative workloads to evaluate system behavior under extreme load conditions.
  2. Simulate peak transaction loads in a staging environment to validate resource scalability and vSAN performance.
  3. Rely on vendor-supplied performance benchmarks that were provided for the selected hardware and validate manually the Live Recovery configuration.
  4. Perform the live recovery test for the master recovery plan to ensure the Recovery Time Objective (RTO) is within the defined SLA.
  5. Deploy the solution to production first and optimize based on live performance feedback from end users.
Correct answer: AB
Question 10
As part of the VMware Cloud Foundation (VCF) logical design, the architect has determined that the VCF Private Cloud will encompass multiple VCF instances contained within a single VCF Fleet. The architect documented the following requirements when using VCF Operations:
Monitoring downtime must be minimized.
Alerting downtime must be minimized.
Which design decision supports these requirements?
  1. Deploy two VCF Operations instances and configure the Aggregator Management Pack.
  2. Deploy a single VCF Operations instance across a multi-VCF instance fleet.
  3. Deploy VCF Operations using the High Availability model with Collector nodes at remote sites.
  4. Deploy VCF Operations using the Simple model with Collector nodes at remote sites.
Correct answer: C
Question 11
An architect is designing a VMware Cloud Foundation (VCF) solution. The following information has been provided by the customer:
Due to budget constraints, the solution must utilize the existing server hardware.
The existing server hardware consists of server models from the same vendor but different generations.
There are four servers available for use in this solution.
What design decision should the architect make for the lifecycle management of the solution based on this information?
  1. Use vSphere Lifecycle Manager baselines for the management domain cluster.
  2. Use a single vSphere Lifecycle Manager composite image for the management and workload domain clusters.
  3. Use separate vSphere Lifecycle Manager images for the management and workload domain clusters.
  4. Use a single vSphere Lifecycle Manager composite image for the management domain cluster.
Correct answer: C
CONNECT US
HOW TO OPEN VCE FILES

Use VCE Exam Simulator to open VCE files
Avanaset

HOW TO OPEN VCEX FILES

Use ProfExam Simulator to open VCEX files
ProfExam Screen

ProfExam
ProfExam at a 20% markdown

You have the opportunity to purchase ProfExam at a 20% reduced price

Get Now!